# Oozy END\_PRINT bug

**URL:** <https://forum.sovol3d.com/t/oozy-end-print-bug/10340>\
**Category:** Sovol SV06 Plus ACE\
**Created:** [August 30, 2026, 10:15pm UTC](https://forum.sovol3d.com/t/oozy-end-print-bug/10340 "2026-08-30T22:15:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rpcyan](https://avatars.discourse-cdn.com/v4/letter/r/34f0e0/32.png) [@rpcyan](https://forum.sovol3d.com/u/rpcyan)\
**Post date:** [August 30, 2026, 10:15pm UTC](https://forum.sovol3d.com/t/oozy-end-print-bug/10340/1 "2026-08-30T22:15:00Z")

</div>

Also evidently impacts the SV06 Plus ACE

> [@Oozy END\_PRINT bugfix (& filament runout/resume bugs)](https://forum.sovol3d.com/t/oozy-end-print-bugfix-filament-runout-resume-bugs/10312):
>
> I found a bug in the end\_print macro. It is present in ALL of Zero’s firmwares. EDIT: Bugs also in SV06 ACE, SV08, and SV08 Max Sovol intends to retract 4mm (with a little z hop in the middle) in this code block, which would reduce ooze at the end of the print and crud to deal with at the start of the next: {% if printer['filament\_switch\_sensor filament\_sensor'].enable == True and printer['filament\_switch\_sensor filament\_sensor'].filament\_detected == True %} {% if (printer.extruder.t…