# Off Center Home

**URL:** <https://forum.sovol3d.com/t/off-center-home/6299>\
**Category:** Sovol SV06 ACE\
**Tags:** homing\
**Created:** [December 18, 2024, 5:30am UTC](https://forum.sovol3d.com/t/off-center-home/6299 "2024-12-18T05:30:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![smplesco](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@smplesco](https://forum.sovol3d.com/u/smplesco)\
**Post date:** [December 18, 2024, 5:30am UTC](https://forum.sovol3d.com/t/off-center-home/6299/1 "2024-12-18T05:30:26Z")

</div>

When trying to print something, I ran into the issue of the printer colliding with the bed. I deduced that where it thought “home” was was incorrect. I cannot figure out how to fix this.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 18, 2024, 7:52am UTC](https://forum.sovol3d.com/t/off-center-home/6299/2 "2024-12-18T07:52:01Z")

</div>

Hi,  
Did you read the manual and how to realize the leveling ?

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [December 18, 2024, 10:07am UTC](https://forum.sovol3d.com/t/off-center-home/6299/3 "2024-12-18T10:07:40Z")

</div>

It certainly sounds trivial but you are not the first with this problem. 2 users have already reported this in the German forum and it was a piece of packaging under the print bed.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 18, 2024, 10:09am UTC](https://forum.sovol3d.com/t/off-center-home/6299/4 "2024-12-18T10:09:39Z")

</div>

Again the foam block under the bed !!!

---

<div class="post-metadata">

**Author:** ![smplesco](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@smplesco](https://forum.sovol3d.com/u/smplesco)\
**Post date:** [December 18, 2024, 10:36pm UTC](https://forum.sovol3d.com/t/off-center-home/6299/5 "2024-12-18T22:36:56Z")

</div>

This was the issue. Thank you so much, printing perfectly now.

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [December 18, 2024, 10:38pm UTC](https://forum.sovol3d.com/t/off-center-home/6299/6 "2024-12-18T22:38:31Z")

</div>

I’m glad to hear it. Have fun!