# Octoprint Info

**URL:** <https://forum.sovol3d.com/t/octoprint-info/1632>\
**Category:** General Chatting\
**Tags:** firmware\
**Created:** [February 12, 2023, 5:17am UTC](https://forum.sovol3d.com/t/octoprint-info/1632 "2023-02-12T05:17:14Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Danabw](https://avatars.discourse-cdn.com/v4/letter/d/22d042/32.png) [@Danabw](https://forum.sovol3d.com/u/Danabw)\
**Post date:** [February 12, 2023, 5:34am UTC](https://forum.sovol3d.com/t/octoprint-info/1632/3 "2023-02-12T05:34:10Z")

</div>

Info here on backpowering when using a Pi to run Octoprint. Backpowering can cause erratic behavior.

> [@Octoprint causing sv06 to lose its mind occasionally](https://forum.sovol3d.com/t/octoprint-causing-sv06-to-lose-its-mind-occasionally/1607/4):
>
> This sounds like it may be back powering from the printer…intermittent odd issues are consistent w/that. Issue: Fix: Easy fix w/a little electrical tape and tweezers. Worth a try. [image]

---

_[View the full topic](https://forum.sovol3d.com/t/octoprint-info/1632)._