# Obico, Camera, SV07PLUS

**URL:** <https://forum.sovol3d.com/t/obico-camera-sv07plus/3496>\
**Category:** Sovol SV07 Plus\
**Tags:** firmware, advice\
**Created:** [September 16, 2023, 11:41pm UTC](https://forum.sovol3d.com/t/obico-camera-sv07plus/3496 "2023-09-16T23:41:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![A\_A\_RON](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@A\_A\_RON](https://forum.sovol3d.com/u/A_A_RON)\
**Post date:** [September 16, 2023, 11:41pm UTC](https://forum.sovol3d.com/t/obico-camera-sv07plus/3496/1 "2023-09-16T23:41:51Z")

</div>

!!!SV07PLUS!!! Has anyone tried, or had any success installing Obico from Kiauh? I have an existing account with 3 other printers and I’d love to add it along with a USB camera. !!!SV07PLUS!!!

---

<div class="post-metadata">

**Author:** ![A\_A\_RON](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@A\_A\_RON](https://forum.sovol3d.com/u/A_A_RON)\
**Post date:** [September 25, 2023, 1:51pm UTC](https://forum.sovol3d.com/t/obico-camera-sv07plus/3496/2 "2023-09-25T13:51:45Z")

</div>

Got the camera up and running, still curious about Obico. Anyone had any success with this on the SV07 Plus?

---

<div class="post-metadata">

**Author:** ![JameJame](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jamejame/32/1380_2.png) [@JameJame](https://forum.sovol3d.com/u/JameJame)\
**Post date:** [September 26, 2023, 4:10am UTC](https://forum.sovol3d.com/t/obico-camera-sv07plus/3496/3 "2023-09-26T04:10:53Z")

</div>

Hey, I just installed Obico on my SV07. No issues, just followed the instructions, all the default answers were fine. Couldn’t be easier.

Here is the instructions I followed [Set up Obico for Klipper | Obico Knowledge Base](https://www.obico.io/docs/user-guides/klipper-setup/)