# Nozzle ooze

**URL:** <https://forum.sovol3d.com/t/nozzle-ooze/5294>\
**Category:** Sovol SV06 Plus\
**Created:** [July 9, 2024, 9:25pm UTC](https://forum.sovol3d.com/t/nozzle-ooze/5294 "2024-07-09T21:25:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Diego](https://avatars.discourse-cdn.com/v4/letter/d/f04885/32.png) [@Diego](https://forum.sovol3d.com/u/Diego)\
**Post date:** [July 9, 2024, 9:25pm UTC](https://forum.sovol3d.com/t/nozzle-ooze/5294/1 "2024-07-09T21:25:57Z")

</div>

Each time I start a project. after the nozzle warms up but before the actual print begins, I have filament that oozes from the nozzle onto the build plate.

Is there a way to prevent this oozing?

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 10, 2024, 7:37am UTC](https://forum.sovol3d.com/t/nozzle-ooze/5294/2 "2024-07-10T07:37:25Z")

</div>

Hi,  
The easiest way to fix this is to print a purge line on the side of the plate before you start printing the model.  
Cheers