# Nozzle going all the way down into bed when autohoming

**URL:** <https://forum.sovol3d.com/t/nozzle-going-all-the-way-down-into-bed-when-autohoming/10428>\
**Category:** Sovol SV06 Plus\
**Created:** [October 8, 2026, 10:41pm UTC](https://forum.sovol3d.com/t/nozzle-going-all-the-way-down-into-bed-when-autohoming/10428 "2026-10-08T22:41:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Poptwatt](https://avatars.discourse-cdn.com/v4/letter/p/e19adc/32.png) [@Poptwatt](https://forum.sovol3d.com/u/Poptwatt)\
**Post date:** [October 8, 2026, 10:41pm UTC](https://forum.sovol3d.com/t/nozzle-going-all-the-way-down-into-bed-when-autohoming/10428/1 "2026-10-08T22:41:37Z")

</div>

Fired the printer up after about a year, went to the leveling option, all was well, until the nozzle didnt stop going downward into the bed, I ended up having to unplug before any further damage was done, now the nozzle is just sitting directly on the bed. Any idea whats going on? Probe light was on btw

 ![IMG_7288](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/ff7ce5824584fe99258afbcfe94f28d6377dfb7c.jpeg)

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [October 8, 2026, 10:45pm UTC](https://forum.sovol3d.com/t/nozzle-going-all-the-way-down-into-bed-when-autohoming/10428/2 "2026-10-08T22:45:36Z")

</div>

I can already see the probe in misaligned…read this.

> [@Auto Home crashes into bed](https://forum.sovol3d.com/t/auto-home-crashes-into-bed/4909):
>
> Hello, Had to buy a new sensor and after I’ve installed the new one I can’t get the printer to work right. Whenever I try to calibrate it, it has to do an auto home first and it always crashes into the bed so I have to power it off. The sensors red light is on, it is mounted correctly and at the correct height. I flashed the firmware and I reset the eeprom several times. I’ve had the problem before and fixed it but that was a while ago and I can’t recall exactly what I did.

---

<div class="post-metadata">

**Author:** ![Poptwatt](https://avatars.discourse-cdn.com/v4/letter/p/e19adc/32.png) [@Poptwatt](https://forum.sovol3d.com/u/Poptwatt)\
**Post date:** [October 8, 2026, 10:52pm UTC](https://forum.sovol3d.com/t/nozzle-going-all-the-way-down-into-bed-when-autohoming/10428/3 "2026-10-08T22:52:55Z")

</div>

Holy hell, that was easy. Thanks alot!😂❤