# No heat the Hot end and the bed

**URL:** <https://forum.sovol3d.com/t/no-heat-the-hot-end-and-the-bed/4282>\
**Category:** Sovol SV01\
**Created:** [January 11, 2024, 6:45pm UTC](https://forum.sovol3d.com/t/no-heat-the-hot-end-and-the-bed/4282 "2024-01-11T18:45:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dionbar](https://avatars.discourse-cdn.com/v4/letter/d/977dab/32.png) [@dionbar](https://forum.sovol3d.com/u/dionbar)\
**Post date:** [January 11, 2024, 6:45pm UTC](https://forum.sovol3d.com/t/no-heat-the-hot-end-and-the-bed/4282/1 "2024-01-11T18:45:29Z")

</div>

I received the follow messages; Restar Printer! There is a problem with the bed or nozzle temperature sensor. Connect to serial monitor. If reading is 0 sensor is not connected. If reading is too hig, sensor is shorted!  
My first problem: I don`t know what is the serial monitor and how to connect it’ Can somebody help, please