# Newbie-Homing-Settings-Questions

**URL:** <https://forum.sovol3d.com/t/newbie-homing-settings-questions/5309>\
**Category:** Sovol Klipperized SV07\
**Created:** [July 13, 2024, 6:55pm UTC](https://forum.sovol3d.com/t/newbie-homing-settings-questions/5309 "2024-07-13T18:55:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![StriperMan01](https://avatars.discourse-cdn.com/v4/letter/s/ebca7d/32.png) [@StriperMan01](https://forum.sovol3d.com/u/StriperMan01)\
**Post date:** [July 13, 2024, 6:55pm UTC](https://forum.sovol3d.com/t/newbie-homing-settings-questions/5309/1 "2024-07-13T18:55:41Z")

</div>

Hello board members! First post here. I’m 69 years old, retired for 10 years and always wanted to explore 3D printing. Picked up a free Sovol SV07. It works, but not perfectly. Search the internet, YouTube etc. Guy who gave it to me suggested I join this forum. So, here I am. I’m sure I will have a lot of questions down the road, let’s start with this one. I’m trying to be sure my printer is finding home. I have checked YouTube, internet, and here. I can follow the manual and suggestions of how to set home position, but how do I save my changed settings and how can I confirm I’m at 100% at the home position. I want the do this because when I was trying to level and the head moves and reaches it maximum position, left or right and then just grinds momentarily. I understand this units stepper motors do not have limit switches. I apologize if I am not using the correct terminology to describe my problems. I welcome any and all comments and suggestions. Feel free, you won’t insult me, I’m trying to learn. Thank you………Lee

---

<div class="post-metadata">

**Author:** ![Sjimmel](https://avatars.discourse-cdn.com/v4/letter/s/b782af/32.png) [@Sjimmel](https://forum.sovol3d.com/u/Sjimmel)\
**Post date:** [December 23, 2024, 7:31pm UTC](https://forum.sovol3d.com/t/newbie-homing-settings-questions/5309/2 "2024-12-23T19:31:26Z")

</div>

Lee I wish you lots of luck and info from the experienced ones over here. I am a newbie too and have exactly the same issue. My sv07 prints great but I too have the grinding when using auto home. and all my prints are a few cm up in the y axis. So my prints are never in the middle. I will follow your topic…