# New SV08 today, Is it safe to print PETG? **URL:** \ **Category:** Sovol SV08\ **Tags:** filament\ **Created:** [October 2, 2024, 4:57pm UTC](https://forum.sovol3d.com/t/new-sv08-today-is-it-safe-to-print-petg/5745 "2024-10-02T16:57:14Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![mistral](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mistral/32/2118_2.png) [@mistral](https://forum.sovol3d.com/u/mistral)\ **Post date:** [October 2, 2024, 8:04pm UTC](https://forum.sovol3d.com/t/new-sv08-today-is-it-safe-to-print-petg/5745/4 "2024-10-02T20:04:21Z")
I am printing a lot in PETG too and i had the issue. I do not understood all but you can just make a hole on your nozzle and add a small piece of metal to make it stronger. It’s explained here and existing some model (on printable if i am well remember) to have a template where to do the hole : [Mayor crash after many flawless prints - #8 by wrusman](https://forum.sovol3d.com/t/mayor-crash-after-many-flawless-prints/5632/8) In addition, i recommand you to reduice the flow (parameter named Maximum Volumetric Speed on your filement) to something like 10mm3/s instead of default value provided by Sovol for orca. That should avoid the trouble + the quality of your print will be very better (at least that worked for me). PS: And if you experiment the trouble, Sovol is very reactive and send the new nozzle + bed plate quickly… but it’s always better to do not need replacement. PS2: I found the template [Template to drill Hole in SV08 Heatblock/Nozzle by cascadier - Thingiverse](https://www.thingiverse.com/thing:6731418) --- _[View the full topic](https://forum.sovol3d.com/t/new-sv08-today-is-it-safe-to-print-petg/5745)._