# Need SV06 cura files **URL:** \ **Category:** Sovol SV06 Fully Open Source 3D Printer\ **Tags:** slicer\ **Created:** [December 8, 2022, 8:00pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992 "2022-12-08T20:00:59Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![jamby](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@jamby](https://forum.sovol3d.com/u/jamby)\ **Post date:** [December 8, 2022, 8:00pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/1 "2022-12-08T20:00:59Z")
My original tf/sd file died. Anyone know where I can get these file: SV06.curaprofile SV06.def.json Sv06\_extruder\_0.dev.json Or a new copy of the original sd/tf Thanks Jim ---
**Author:** ![AdamByram](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/adambyram/32/288_2.png) [@AdamByram](https://forum.sovol3d.com/u/AdamByram)\ **Post date:** [December 8, 2022, 11:16pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/2 "2022-12-08T23:16:53Z")
I got got my SV06 a few days ago and made a backup of the SD card files before I formatted it. I don’t think they have all of these on the website - I believe the curaprofile file is on the download page, but not the other two. I zipped up those three files and put them up on S3 since the forum doesn’t allow posting any files other than images. Hopefully that’ll help. [https://s3.amazonaws.com/share.adambyram.com/SovolSV06-CuraFiles.zip](https://s3.amazonaws.com/share.adambyram.com/SovolSV06-CuraFiles.zip) ---
**Author:** ![jamby](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@jamby](https://forum.sovol3d.com/u/jamby)\ **Post date:** [December 8, 2022, 11:35pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/3 "2022-12-08T23:35:52Z")
Adam Do you know where curaprofile file is on the download page is? Thanks Jim ---
**Author:** ![jamby](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@jamby](https://forum.sovol3d.com/u/jamby)\ **Post date:** [December 8, 2022, 11:50pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/4 "2022-12-08T23:50:58Z")
Adam I found it at [SV06 Cura Profile (for reference) - Google Drive](https://drive.google.com/drive/folders/1oNSXbsIE5k0GJ_crEVy_duV-eMzZGcak) have you seen this one [GitHub - Sovol3d/Sv06-Source-Code: Visit sovol website.Welcome to post your ideas on sovol user group or sovol forum.](https://github.com/Sovol3d/Sv06-Source-Code) Thanks again Jim ---
**Author:** ![AdamByram](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/adambyram/32/288_2.png) [@AdamByram](https://forum.sovol3d.com/u/AdamByram)\ **Post date:** [December 9, 2022, 1:37am UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/5 "2022-12-09T01:37:31Z")
Yep, that was the .curaprofile I saw on their download page, but they don’t have those two .json files posted. I’m not using Cura myself, so I don’t know how much those matter, but if those are needed I put the ones from the SD card in the little zip I uploaded. That Github link is for the printer firmware itself. Useful if you want to build your own firmware, but there won’t be anything in there for Cura or any slicer - it’s just the raw firmware. ---
**Author:** ![PatrickG](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@PatrickG](https://forum.sovol3d.com/u/PatrickG)\ **Post date:** [July 26, 2025, 3:36pm UTC](https://forum.sovol3d.com/t/need-sv06-cura-files/992/6 "2025-07-26T15:36:11Z")
Sorry, Might be late reply, but I found this link on how to add SV06 to Cura: > **[How to add Sovol SV06 to the original Cura](https://www.sovol3d.com/blogs/sovol-sv06/how-to-add-sovol-sv06-to-the-original-cura#comment_form)** > > \*This method is available on the version of Cura V5.1.1 and above, the old version of Cura may cause import failure. If you would like to use the SV06 with the original Cura, please follow the two methods listed below. SV06 Cura... My question if anyone knows - how to add SV06 ACE to Cura? Thanks