# Need replacement hotend

**URL:** <https://forum.sovol3d.com/t/need-replacement-hotend/4536>\
**Category:** Sovol SV01\
**Created:** [February 16, 2024, 5:20pm UTC](https://forum.sovol3d.com/t/need-replacement-hotend/4536 "2024-02-16T17:20:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sblack](https://avatars.discourse-cdn.com/v4/letter/s/bc79bd/32.png) [@Sblack](https://forum.sovol3d.com/u/Sblack)\
**Post date:** [February 16, 2024, 5:20pm UTC](https://forum.sovol3d.com/t/need-replacement-hotend/4536/1 "2024-02-16T17:20:00Z")

</div>

A print failed last night, by the time i found out there was a baseball sized chunk of pla melted on to the bottom end of the extruder. The hotend is ruined as is the heat sink. I can’t find spare parts on the sovol website. There are other hot ends but they don’t look the same. They don’t have the heat sink. Anyone know what would be compatible?