# Need King Aurthur **URL:** \ **Category:** Sovol SV08 MAX\ **Tags:** heat-fails\ **Created:** [April 25, 2026, 7:45pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928 "2026-04-25T19:45:55Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![FastlaneDave](https://avatars.discourse-cdn.com/v4/letter/f/c4cdca/32.png) [@FastlaneDave](https://forum.sovol3d.com/u/FastlaneDave)\ **Post date:** [April 25, 2026, 7:45pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/1 "2026-04-25T19:45:55Z")
It would be awesome if parts were available for this machine. I would like a spare print head. ![Need King Aurthur](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/9/9cd28262cca82f12f5138db6de8ae39fe618fbd7.jpeg) ---
**Author:** ![FastlaneDave](https://avatars.discourse-cdn.com/v4/letter/f/c4cdca/32.png) [@FastlaneDave](https://forum.sovol3d.com/u/FastlaneDave)\ **Post date:** [April 25, 2026, 7:48pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/2 "2026-04-25T19:48:16Z")
This is not a machine failure the part broke loose from the bed while I was out. I should have washed the bed plate better. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [April 25, 2026, 8:13pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/3 "2026-04-25T20:13:11Z")
> **[Extruder Hotend Kit for Sovol SV08 MAX](https://www.sovol3d.com/products/extruder-hotend-kit-for-sovol-sv08-max)** > > Complete hotend kit for Sovol SV08 MAX with 0.4mm hardened steel nozzle, 400°C PT1000b thermistor, and 85W ceramic heater. Designed for high-temperature, abrasive filaments. > **[Sovol Zero/SV08 MAX Extruder Replacement Kit](https://www.sovol3d.com/products/sovol-zero-extruder-replacement-kit)** > > Upgrade and maintain your Sovol Zero/SV08 MAX with this complete extruder replacement kit. Includes a ceramic heater, silicone sleeve, Clip & thermistor, and more for consistent high-quality printing. ---
**Author:** ![MikeHides](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mikehides/32/4372_2.png) [@MikeHides](https://forum.sovol3d.com/u/MikeHides)\ **Post date:** [April 25, 2026, 8:43pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/4 "2026-04-25T20:43:58Z")
😂 King Aurthur indeed! I had a similar incident after changing the nozzle on my Zovol Zero. I was able to recover with a heat gun, a few slight burns 😉 , and some patience… Yours is a lot more severe, maybe a hot iron, or a hack saw with wide teeth to keep the friction down? Just to take off the bulk of it, then the heat gun to finish the rest. From the photo, I cant tell if the wires were torn off or not, but someone also suggested plugging it into the printer and setting a preheat for a hotter filament type, ABS etc, and then with some heat resistant gloves try to work it out of the filament blob. Hope you are able to recover while looking/waiting for parts. Cheers, 🥃 -Mike This was mine (PETG): ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/327b4c2753f98ac523215cc13c751854dbf825d4.jpeg) Just in case the nozzle change is the same for you, this video was shared with me for nozzle changes. [![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/57f079f971bf6afbb44b313827fe0b50891698f2.jpeg "How to change nozzle | Sovol SV06") ](https://www.youtube.com/watch?v=B0Kz2Hi6jxc) ---
**Author:** ![FastlaneDave](https://avatars.discourse-cdn.com/v4/letter/f/c4cdca/32.png) [@FastlaneDave](https://forum.sovol3d.com/u/FastlaneDave)\ **Post date:** [April 25, 2026, 8:49pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/5 "2026-04-25T20:49:45Z")
There is more damage than just the hot end, I could use a complete print head assembly. Eddie sensor is also damaged and the cover and blower, but I think I can salvage the cover, or 3d print another one. I have 2 spare hot ends. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [April 25, 2026, 9:11pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/6 "2026-04-25T21:11:46Z")
They are out of stock. Email Sovol at [info@sovol3d.com](mailto:info@sovol3d.com) > **[Complete Extruder Assembly Kit for Sovol SV08 MAX](https://www.sovol3d.com/products/complete-extruder-assembly-kit-for-sovol-sv08-max)** > > Fully assembled extruder kit for Sovol SV08 MAX. Pre-built with essential components, ready for fast installation and reliable performance. ---
**Author:** ![Custom-Miser](https://avatars.discourse-cdn.com/v4/letter/c/d07c76/32.png) [@Custom-Miser](https://forum.sovol3d.com/u/Custom-Miser)\ **Post date:** [April 27, 2026, 5:06pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/7 "2026-04-27T17:06:07Z")
I did the same thing, on my first print with ASA. By heating the edge of a utility knife blade, I was able (EVENTUALLY) to clear it. But not without cutting a wire on the thermister. I wasn’t able to find a thermister on Amazon. But, I did find the hotend kit. ---
**Author:** ![FastlaneDave](https://avatars.discourse-cdn.com/v4/letter/f/c4cdca/32.png) [@FastlaneDave](https://forum.sovol3d.com/u/FastlaneDave)\ **Post date:** [April 29, 2026, 10:55pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/8 "2026-04-29T22:55:16Z")
Solid advice, Sovol got me taken care of. ---
**Author:** ![FastlaneDave](https://avatars.discourse-cdn.com/v4/letter/f/c4cdca/32.png) [@FastlaneDave](https://forum.sovol3d.com/u/FastlaneDave)\ **Post date:** [April 29, 2026, 10:56pm UTC](https://forum.sovol3d.com/t/need-king-aurthur/9928/9 "2026-04-29T22:56:02Z")
Welcome to the forums.