# Não consigo imprimir, impressora não vai para home **URL:** \ **Category:** Sovol SV04 IDEX\ **Created:** [March 24, 2025, 2:31pm UTC](https://forum.sovol3d.com/t/nao-consigo-imprimir-impressora-nao-vai-para-home/7308 "2025-03-24T14:31:11Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\ **Post date:** [March 24, 2025, 8:49pm UTC](https://forum.sovol3d.com/t/nao-consigo-imprimir-impressora-nao-vai-para-home/7308/3 "2025-03-24T20:49:19Z")
Hello gmbaratella & welcome to forum! Your problem description seems to be a bit inconsistent: Usually, your SV04 won’t start printing at all without a working CR-Touch sensor. Anyway, that sensor can be tested - the linked thread shows how to do: > [@SV04 z home not working - sensor issue?](https://forum.sovol3d.com/t/sv04-z-home-not-working-sensor-issue/4733/2): > > Hi Niels, how to run touch sensor tests is decribed here - it will work both for BL-touch and CR-touch sensors: [https://www.3dprintbeast.com/bltouch-self-test/](https://www.3dprintbeast.com/bltouch-self-test/) You’ll need a tool like Pronterface (Freeware) to initiate the mentioned G-Code test commands via USB connection from your computer. If the touch sensor is still not working you may want to try the trouble shooting instructions suggested in the following link [Caveat: I won’t recommend changing firmware before being sure that there is… Good luck! Björn --- _[View the full topic](https://forum.sovol3d.com/t/nao-consigo-imprimir-impressora-nao-vai-para-home/7308)._