# My x axis wont move

**URL:** <https://forum.sovol3d.com/t/my-x-axis-wont-move/410>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [July 5, 2022, 7:34pm UTC](https://forum.sovol3d.com/t/my-x-axis-wont-move/410 "2022-07-05T19:34:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scrufett](https://avatars.discourse-cdn.com/v4/letter/s/3d9bf3/32.png) [@scrufett](https://forum.sovol3d.com/u/scrufett)\
**Post date:** [July 5, 2022, 7:34pm UTC](https://forum.sovol3d.com/t/my-x-axis-wont-move/410/1 "2022-07-05T19:34:28Z")

</div>

Y and Z move but not the x axis

---

<div class="post-metadata">

**Author:** ![Ciol](https://avatars.discourse-cdn.com/v4/letter/c/e274bd/32.png) [@Ciol](https://forum.sovol3d.com/u/Ciol)\
**Post date:** [July 8, 2022, 3:14am UTC](https://forum.sovol3d.com/t/my-x-axis-wont-move/410/2 "2022-07-08T03:14:14Z")

</div>

Hi Scrufett  
Do you have a multimeter to check if you have current going into your stepper motor?  
The idea would be to use a multimeter to figure out where the issue is located( ex: Cable, Stepper Motor or Motherboard)