# My sovol sv07 plus was working fine, then last night while printing shut off. now wont power on

**URL:** <https://forum.sovol3d.com/t/my-sovol-sv07-plus-was-working-fine-then-last-night-while-printing-shut-off-now-wont-power-on/6185>\
**Category:** General Chatting\
**Tags:** SV07, SV07plus\
**Created:** [December 5, 2024, 11:45pm UTC](https://forum.sovol3d.com/t/my-sovol-sv07-plus-was-working-fine-then-last-night-while-printing-shut-off-now-wont-power-on/6185 "2024-12-05T23:45:51Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Lupus](https://avatars.discourse-cdn.com/v4/letter/l/a698b9/32.png) [@Lupus](https://forum.sovol3d.com/u/Lupus)\
**Post date:** [March 5, 2025, 10:41am UTC](https://forum.sovol3d.com/t/my-sovol-sv07-plus-was-working-fine-then-last-night-while-printing-shut-off-now-wont-power-on/6185/8 "2025-03-05T10:41:56Z")

</div>

Yes, I set that as part of assembly, and it worked for the first day of printing. Probably approaching a total active time of 4 hours. It died earlier today (haven’t slept yet so same day to me). Forgot to mention that I had set that switch, so thanks for checking.

---

_[View the full topic](https://forum.sovol3d.com/t/my-sovol-sv07-plus-was-working-fine-then-last-night-while-printing-shut-off-now-wont-power-on/6185)._