# Mintemp error Hotbed

**URL:** <https://forum.sovol3d.com/t/mintemp-error-hotbed/2825>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [June 12, 2023, 4:23pm UTC](https://forum.sovol3d.com/t/mintemp-error-hotbed/2825 "2023-06-12T16:23:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zsari](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/zsari/32/1121_2.png) [@Zsari](https://forum.sovol3d.com/u/Zsari)\
**Post date:** [June 12, 2023, 4:23pm UTC](https://forum.sovol3d.com/t/mintemp-error-hotbed/2825/1 "2023-06-12T16:23:47Z")

</div>

I submitted an email to customer support over this but haven’t heard anything. My printer was working fine for about two months and then all of a sudden I start getting this error “printer halted: mintemp bed”. When the bed moves to the temperture sensor shows ERR and then throws up that error message and cancels. I have orders that need to go out and I could really use some support on this.

 ![IMG_20230612_113723](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/2/22ee8fea429a3489bd67f7be6f74970daf9c6567.jpeg)