# Mesa de Vidro na Sovol sv06

**URL:** <https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [December 17, 2023, 5:34pm UTC](https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093 "2023-12-17T17:34:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pampa](https://avatars.discourse-cdn.com/v4/letter/p/a88e57/32.png) [@Pampa](https://forum.sovol3d.com/u/Pampa)\
**Post date:** [December 17, 2023, 5:34pm UTC](https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093/1 "2023-12-17T17:34:26Z")

</div>

Oi pessoal. Estou tendo muitos e muitos problemas para impressão de ABS, direto na mesa da impressora, porém mesmo usando spray de cabelo, não gruda. Por isto estou tentando usar vidro na mesa e usar os sprays que colam muito bem, porém não consigo nivelar a extrusora, ela simplesmente ignora que tenha um vidro na base e bate e fica forçando para que o bico chegue no fundo da mesa onde fica o imam. Alguém usa vidro na mesa e conseguiu nivelar corretamente, se tiver me dá algumas dicas, obrigado e fico no aguardo.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 17, 2023, 5:50pm UTC](https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093/2 "2023-12-17T17:50:32Z")

</div>

Hello,  
You can’t use such a plate with this printer.  
The bed must be in metal to be detected by the bltouch

---

<div class="post-metadata">

**Author:** ![Pampa](https://avatars.discourse-cdn.com/v4/letter/p/a88e57/32.png) [@Pampa](https://forum.sovol3d.com/u/Pampa)\
**Post date:** [December 17, 2023, 7:13pm UTC](https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093/3 "2023-12-17T19:13:00Z")

</div>

Hi Mich0111, thanks for the response. It is unfortunate that such a modern and up-to-date printer is not able to accept glass on the table, as this palliative of using hairspray so that the ABS filament fixes firmly on the table is only possible with the glass table, this metal table does not fixes the abs correctly. Thanks.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 17, 2023, 7:42pm UTC](https://forum.sovol3d.com/t/mesa-de-vidro-na-sovol-sv06/4093/4 "2023-12-17T19:42:20Z")

</div>

You should try printing with ASA filament.  
It has equivalent and even best properties to ABS and is as easy to print as PLA.