# Major issue **URL:** \ **Category:** Sovol SV08\ **Created:** [November 8, 2024, 8:40pm UTC](https://forum.sovol3d.com/t/major-issue/5966 "2024-11-08T20:40:51Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 8, 2024, 8:40pm UTC](https://forum.sovol3d.com/t/major-issue/5966/1 "2024-11-08T20:40:51Z")
MAJOR ISSUE Error if ask for OrcaSlicer to print Lot’s of ERRORs please see image ![MAJOR CRASH](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/736db90cc18d9c2db66a9358795be3ae23614e62.jpeg) ALSO reflashed Firmware Than after Bed Mesh NOTHING but Booting for ever Get it “almost” working then this destroys everything; printing for USB dive; have to reflash, etc **Internal error on command:“G1”** ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 8, 2024, 8:50pm UTC](https://forum.sovol3d.com/t/major-issue/5966/2 "2024-11-08T20:50:18Z")
From your pic it looks like you were trying to send a file to the printer & it failed. That is an internet or cloud issue, re-flashing wouldn’t have fixed that. I don’t know anything about Klipper, so someone else will have to help. ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 9, 2024, 1:00am UTC](https://forum.sovol3d.com/t/major-issue/5966/3 "2024-11-09T01:00:25Z")
No WiFi at all shown not even the default after reflashing about 5 times; first 4 times it did not fully work. All happed after filament hook on the end jammed so it thought it was 3D printing but it wasn’t because the filament was jammed. I have manged to 3D print one small test file off a USB drive, after all the reflashing. So that is something I will look again tomorrow in the UK ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 9, 2024, 9:18am UTC](https://forum.sovol3d.com/t/major-issue/5966/4 "2024-11-09T09:18:43Z")
Show IP shows no IP not even the 127.O … default. Thank you ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 9, 2024, 2:07pm UTC](https://forum.sovol3d.com/t/major-issue/5966/5 "2024-11-09T14:07:30Z")
You can print by SD Card, so that’s good. Try this: [![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/f683876fd42026090330414172a68fbbeda5fc0f.jpeg "How to connect SV08 to WiFi and print") ](https://www.youtube.com/watch?v=ODud4t_qWdQ) ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 9, 2024, 2:32pm UTC](https://forum.sovol3d.com/t/major-issue/5966/6 "2024-11-09T14:32:09Z")
I would be really surprised if such an explanation is not in the user manual. ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 9, 2024, 3:13pm UTC](https://forum.sovol3d.com/t/major-issue/5966/7 "2024-11-09T15:13:08Z")
FAILS SOVOL NOT MAINLINE KLIPPER GOT IT working for all of 10 minutes than NO WiFi or LAN and nothing in Show IP: A WASTE OF TIME Factory Resets, reflash NOTHING works ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 9, 2024, 10:40pm UTC](https://forum.sovol3d.com/t/major-issue/5966/8 "2024-11-09T22:40:00Z")
> [@SV08\_user](#): > > Get it “almost” working then this destroys everything; printing for USB dive; have to reflash, etc > > **Internal error on command:“G1”** Get it “almost” working then this destroys everything; printing for USB dive; have to reflash, etc **Internal error on command:“G1”** ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 16, 2024, 5:37pm UTC](https://forum.sovol3d.com/t/major-issue/5966/9 "2024-11-16T17:37:44Z")
![SET_TIMELAPSE_SETUP error](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/8eb1beca5976788b8936639d4568ff0094013e89.jpeg) ![Error G1 command](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/19aba767ebe7af149ed6b4accd750e9ebe3bdd88.jpeg) ![MAJOR CRASH](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/736db90cc18d9c2db66a9358795be3ae23614e62.jpeg) ![heat soak](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/b0733f926568d02be3b6ada2f850ee1e37e31e65.png) EDIT: Moved to existing thread **Lion** ---
**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\ **Post date:** [November 18, 2024, 11:04am UTC](https://forum.sovol3d.com/t/major-issue/5966/10 "2024-11-18T11:04:27Z")
Is this the stock firmware and settings or have you modified anything on it ? ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 18, 2024, 1:58pm UTC](https://forum.sovol3d.com/t/major-issue/5966/11 "2024-11-18T13:58:01Z")
It is working now, (same method same raw code), after about 25 firmware installations using the same method. Don’t expect it to last long working. Very odd indeed. Hope it lasts a long time. After getting it working I uploaded some modified configuration files and it still works ---
**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\ **Post date:** [November 18, 2024, 3:03pm UTC](https://forum.sovol3d.com/t/major-issue/5966/12 "2024-11-18T15:03:58Z")
Don’t modify too much, as it may corrupt other settings. In my opinion all the “must change” firmware settings you see on youtube etc have minimal or maybe even an adverse effect. The biggest change for me was mounting a regular M12 probe and fixing the extruder gear pin, after that I never needed a heat-soak or whatever and the printer just prints whatever I throw at him ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 18, 2024, 11:44pm UTC](https://forum.sovol3d.com/t/major-issue/5966/13 "2024-11-18T23:44:14Z")
**SOVOL don’t use Full Klipper** YES Don’t modify too much, as it may corrupt other settings [printer.cfg](https://forum.sovol3d.com/uploads/short-url/4QP062VxRjAMlXxa5PdsgweFtup.cfg) (11.8 KB) [raise\_z\_5.cfg](https://forum.sovol3d.com/uploads/short-url/dSQAnLvfGZgJO2SPTx4oMg6sMik.cfg) (1.5 KB) [raise\_z\_50.cfg](https://forum.sovol3d.com/uploads/short-url/cLq0HF7Dcf8XQlMrJnTEiCFTwxu.cfg) (1.6 KB) [M300.cfg](https://forum.sovol3d.com/uploads/short-url/vsSk6wSNVzYPxwsGNcU7CpA1XC6.cfg) (801 Bytes) . ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 18, 2024, 11:47pm UTC](https://forum.sovol3d.com/t/major-issue/5966/14 "2024-11-18T23:47:01Z")
> [@wrusman](#): > > e Layers and other Sovol SV08 issues Fix that pin [![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/88099a937e4b1472c9e2cfaf35aea1aaccc4bd30.jpeg "SOVOL SV08 Fixed Gaps in first layer") ](https://www.youtube.com/watch?v=id2pMq37hFs) ---
**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\ **Post date:** [November 18, 2024, 11:50pm UTC](https://forum.sovol3d.com/t/major-issue/5966/15 "2024-11-18T23:50:34Z")
> [@wrusman](#): > > M12 probe Unused:- but macro may need a fix to the PAUSE [![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/f72189601cb8acaa64f081a7bd19be1249945d5e.jpeg "SOVOL SV08 Paint Supports and Pause at Layer") ](https://www.youtube.com/watch?v=Jk3T96FKy5U) [heatsoak\_bed.cfg](https://forum.sovol3d.com/uploads/short-url/8Q2DzydHcjpj0yq5bk1KjeB8AMl.cfg) (3.4 KB) [Macro.cfg](https://forum.sovol3d.com/uploads/short-url/mf61iOn12IEjNNraFLBcfMsEKvN.cfg) (19.7 KB) [timelapse.cfg](https://forum.sovol3d.com/uploads/short-url/xsryV5UyFmCkIF4F0xJMvbyLmVj.cfg) (22.0 KB) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/c8366f7d43f008332e7c6dcb896aad6deac01a21.jpeg) [@system](https://forum.sovol3d.com/u/system)\ **Post date:** [November 25, 2024, 11:50pm UTC](https://forum.sovol3d.com/t/major-issue/5966/16 "2024-11-25T23:50:57Z")
This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.