# Mainline Klipper updates for all Sovol printers **URL:** \ **Category:** Firmware\ **Created:** [December 18, 2025, 5:06pm UTC](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230 "2025-12-18T17:06:18Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [December 18, 2025, 5:06pm UTC](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230/1 "2025-12-18T17:06:18Z")
@sovol3d Klipper has added support for load cells. The HX711 ADC is supported. There is no longer a need for custom python modules to support the loadcell features installed into Sovol printers. I submit that, in light of Sovol’s claim to be OPEN SOURCE, Sovol owes it to their user base to release updated firmware that is Mainline Klipper. Sovol should also release the source code for the OS (Linux) that is installed on the embedded SOC that hosts Klipper on the mainboard of Sovol’s printers. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [December 18, 2025, 5:38pm UTC](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230/3 "2025-12-18T17:38:34Z")
Please Indicate your interest in mainline firmware below: _Poll ([view on site](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230/3))_ Please indicate which printers you own _Poll ([view on site](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230/3))_ ---
**Author:** ![zonga50](https://avatars.discourse-cdn.com/v4/letter/z/e56c9b/32.png) [@zonga50](https://forum.sovol3d.com/u/zonga50)\ **Post date:** [December 19, 2025, 12:22am UTC](https://forum.sovol3d.com/t/mainline-klipper-updates-for-all-sovol-printers/9230/4 "2025-12-19T00:22:24Z")
I second this notion