# Layer shifting problem? **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [November 7, 2024, 4:52pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960 "2024-11-07T16:52:31Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 4:52pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/1 "2024-11-07T16:52:31Z")
![Imagem do WhatsApp de 2024-11-07 à(s) 12.49.16_25cb7c14](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/f9ae4cca91ff8538de14b6fb76acdf68a0e07220.jpeg) second time happening…any idea what it is? ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 7, 2024, 4:53pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/2 "2024-11-07T16:53:45Z")
Hello, We need more details. ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 4:57pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/3 "2024-11-07T16:57:50Z")
I calibrated the printer and everything was fine. The printer simply starts printing very well and after a while it looks like the photo and the nozzle keeps scraping against the part. When the nozzle returns to the starting point, it makes a strange noise. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 7, 2024, 5:08pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/4 "2024-11-07T17:08:59Z")
If it’s the first time you use it, did you check all points ? (Leveling, ribbon, belt, tighten screws, …). Did you check temperature and speed ? And so on … ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 5:16pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/5 "2024-11-07T17:16:20Z")
I checked everything correctly, belts ok, temperature 210, speed 60, travel speed 150 ![Screenshot_5](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/7bae15c2b8ba3e02398e0fcde7f1943a0e102176.png) ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 7, 2024, 7:55pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/6 "2024-11-07T19:55:12Z")
First…whenever you post a layer shift question it’s best to post a pic of the print while it’s on the bed…this way we can see where it shifted…right or left front or back. Looking at that pic, I’d say the nozzle hit the infill & caused it. But we still need more info, what does the whole print look like, what filament are you using (PLA, PETG, etc), what are your printing temps. ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 9:27pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/7 "2024-11-07T21:27:06Z")
![3](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/84fb456012f597f54ea14b15569233ebab0208cd.jpeg) PLA 210 TEMPERATURE CALIBRATION OK BELT TENSION OK ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 9:27pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/8 "2024-11-07T21:27:38Z")
![1](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/4/4255079efab04329fc78802205d5e53063c1bab3.jpeg) ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 7, 2024, 9:51pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/9 "2024-11-07T21:51:06Z")
![Clipboard_11-07-2024_01](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/5ad078fe69483544bb7261aeaf73c4bf3d20152c.jpeg) I think you either have a nozzle clog or maybe your printing to cold. You say it’s PLA at 210\*, but PLA+ or Pro would be 215\*-220\*. How was it printing before this issue happened, were you printing with PLA the whole time…?? ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 7, 2024, 9:59pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/10 "2024-11-07T21:59:17Z")
I wonder what the final impression should be. ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:01pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/11 "2024-11-07T22:01:35Z")
![Screenshot_7](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/37707ca6b3d1b89429d537af116cb3436d634640.png) SUPPORT ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:02pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/12 "2024-11-07T22:02:06Z")
![Screenshot_6](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/0/0f96092964775b697b829505375371ef2f8fa46e.png) ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:03pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/13 "2024-11-07T22:03:28Z")
![Screenshot_8](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1cb021fc720ae108cf321250487ff7cd1598b4a5.png) ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:08pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/14 "2024-11-07T22:08:35Z")
The 3d print starts well ,but in the middle of printing this starts to happen ,what shows in the photo ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:09pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/15 "2024-11-07T22:09:28Z")
![EXTRU](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/7/79f1570fbae33333203c42ca0dfc16f24064f66d.jpeg) the nozzle is brand new and arrived yesterday ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 7, 2024, 10:16pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/16 "2024-11-07T22:16:10Z")
Did you try to print something else ? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 7, 2024, 10:30pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/17 "2024-11-07T22:30:06Z")
What type of nozzle…brass or hardened…?? ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:51pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/18 "2024-11-07T22:51:37Z")
![20000](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1ecc81a4027e1104177355cc61d2004c28df5b4d.jpeg) brass ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:52pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/19 "2024-11-07T22:52:30Z")
yes but I got the same results… ---
**Author:** ![ALEXHAGIO](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@ALEXHAGIO](https://forum.sovol3d.com/u/ALEXHAGIO)\ **Post date:** [November 7, 2024, 10:53pm UTC](https://forum.sovol3d.com/t/layer-shifting-problem/5960/20 "2024-11-07T22:53:57Z")
![Imagem do WhatsApp de 2024-11-07 à(s) 16.01.04_f20f931a](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/e/e01fe06da1686caebce22a46930a4e46223fc228.jpeg) [Next page](https://forum.sovol3d.com/t/layer-shifting-problem/5960.md?page=2)