# Layer shift on upper layers - please help! **URL:** \ **Category:** Sovol Klipperized SV07\ **Created:** [September 4, 2023, 9:56pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418 "2023-09-04T21:56:25Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![W0olf](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/w0olf/32/1320_2.png) [@W0olf](https://forum.sovol3d.com/u/W0olf)\ **Post date:** [September 4, 2023, 9:56pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/1 "2023-09-04T21:56:25Z")
So I got my new SV07 today. I am really excited, but I have a Problem: As soon as the print reaches some height, my print gets a layershift on y axis. Already tried to change belt tension, only difference was, that the shift happens into another direction. Happened to the Benchy and a low poly skull I just started. Printing PLA with 100% Speed. Is that maybe too much speed for upper regions? Please help! ![signal-2023-09-04-16-45-54-531](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/3a4dd3f29a65f7d9e561179ab4a898670863bc03.jpeg) ---
**Author:** ![W0olf](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/w0olf/32/1320_2.png) [@W0olf](https://forum.sovol3d.com/u/W0olf)\ **Post date:** [September 4, 2023, 9:59pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/2 "2023-09-04T21:59:13Z")
![XHT_20230904_223804338_8.4.400](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/a/ac67e84804bfe75f63a298fc68d650f009f2ffce.jpeg) ---
**Author:** ![Deybacsi](https://avatars.discourse-cdn.com/v4/letter/d/8e7dd6/32.png) [@Deybacsi](https://forum.sovol3d.com/u/Deybacsi)\ **Post date:** [September 6, 2023, 7:40pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/3 "2023-09-06T19:40:20Z")
Similar issue was fixed for me after changing the default acceleration parameters from 8000 and 3000 to 5000 and 2000 in my slicer (Cura). My current Cura settings: ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/329b3a6ddae0948d017ce62b6034ebefa9cd85c6.png) As I have read it on reddit, it seems the bed in Y can not move so quick. Previously I also had to adjust my belt tensions too. Hope this helps. ---
**Author:** ![TazDevl](https://avatars.discourse-cdn.com/v4/letter/t/e480ec/32.png) [@TazDevl](https://forum.sovol3d.com/u/TazDevl)\ **Post date:** [September 11, 2023, 1:43pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/4 "2023-09-11T13:43:06Z")
Could be belt tension related? ---
**Author:** ![Rosefairy](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@Rosefairy](https://forum.sovol3d.com/u/Rosefairy)\ **Post date:** [September 23, 2023, 7:50pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/5 "2023-09-23T19:50:44Z")
Hi Folks, did this help? I’ve the same problem and will return the printer on monday, because nothing seems to help. I’ll give your solution, Deybacsi, a try - thanks for sharing… On the picture added you can see the shift in height on a little dragon. ![drache-shifting-in-hoehe](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/a/a43aa39cecb57143e3fd8ff3774cd675b6719b3b.jpeg) ---
**Author:** ![xxduffyxx](https://avatars.discourse-cdn.com/v4/letter/x/8baadc/32.png) [@xxduffyxx](https://forum.sovol3d.com/u/xxduffyxx)\ **Post date:** [November 14, 2023, 2:29pm UTC](https://forum.sovol3d.com/t/layer-shift-on-upper-layers-please-help/3418/6 "2023-11-14T14:29:16Z")
I have had this problem too, I still get it sometimes, but since I added Christian Vick’s printer add-ons and followed his guide it is better. You can find them on printables and they add so much more to this machine, There are a few pieces of code you need to edit, but it will add tonnes of macros and have the part extruder fan only go on and off when needed, I still am having issues with some prints but it’s a combo of bed adhesion,flow, and fan speed.