# KlipperScreen Firmware Flash Issue

**URL:** <https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245>\
**Category:** Sovol SV06 Plus\
**Created:** [March 19, 2025, 8:46am UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245 "2025-03-19T08:46:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![phenam79](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@phenam79](https://forum.sovol3d.com/u/phenam79)\
**Post date:** [March 19, 2025, 8:46am UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/1 "2025-03-19T08:46:58Z")

</div>

Hi.

I needed to reflash the firmware on my sovol klipper screen. I downloaded the firmware and instructions from the official sovol product page.

> **[SV06 Plus Klipper Screen Firmware - Google Drive](https://drive.google.com/drive/folders/1vpKWQXOMGV58dYcx2wK9wJC0HJNqU8tg)**

Was able to reflash the screen successfully, however after it finished I am presented with a language selection page but it’s in landscape orientation. I’m unable to proceed to the next page. Have tried to reflash the firmware with multiple USB sticks with the same result. Unsure how to fix this.

Any help is much appreciated. Thanks!

 ![PXL_20250318_135918059.MP](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/c/ca275cd072417a39d7334657912358f93f626c3a.jpeg)

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [March 19, 2025, 11:26am UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/2 "2025-03-19T11:26:04Z")

</div>

@sovol3d

Have you put in a ticket..??  
[info@sovol3d.com](mailto:info@sovol3d.com)

Sorry, I don’t know much about the Klipper Screen.

---

<div class="post-metadata">

**Author:** ![phenam79](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@phenam79](https://forum.sovol3d.com/u/phenam79)\
**Post date:** [March 19, 2025, 11:43am UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/3 "2025-03-19T11:43:18Z")

</div>

Yep I have, waiting on a response. Hoped if I also post here someone may have come across this issue.

---

<div class="post-metadata">

**Author:** ![cardoc](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cardoc/32/6926_2.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [March 29, 2025, 1:10am UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/4 "2025-03-29T01:10:17Z")

</div>

Haven’t seen that one… But if you want a updated OS with community support see info at [https://torte71.github.io/InsideSovolKlipperScreen/](https://torte71.github.io/InsideSovolKlipperScreen/)

---

<div class="post-metadata">

**Author:** ![phenam79](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@phenam79](https://forum.sovol3d.com/u/phenam79)\
**Post date:** [April 2, 2025, 10:23pm UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/5 "2025-04-02T22:23:03Z")

</div>

Thank you for this suggestion, I have applied and image from the link you provided. Screen is working normally again and now with updated OS 🙂

---

<div class="post-metadata">

**Author:** ![cardoc](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cardoc/32/6926_2.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [April 2, 2025, 10:37pm UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245/6 "2025-04-02T22:37:42Z")

</div>

You are very welcome. I did none of the hard stuff. The person who sorted out all the issues and put it on github is the real hero.
