# Klipper via Sovol screen or rasberry pi?

**URL:** <https://forum.sovol3d.com/t/klipper-via-sovol-screen-or-rasberry-pi/4416>\
**Category:** Sovol SV06 Plus\
**Created:** [January 28, 2024, 6:29pm UTC](https://forum.sovol3d.com/t/klipper-via-sovol-screen-or-rasberry-pi/4416 "2024-01-28T18:29:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shelby](https://avatars.discourse-cdn.com/v4/letter/s/aeb1de/32.png) [@Shelby](https://forum.sovol3d.com/u/Shelby)\
**Post date:** [January 28, 2024, 6:29pm UTC](https://forum.sovol3d.com/t/klipper-via-sovol-screen-or-rasberry-pi/4416/1 "2024-01-28T18:29:01Z")

</div>

I’m new to 3d printing and have been using an SV06 plus for a few weeks. I can get around (barely) in linux, so my question is: is there any advantage to running Klipper on a rasberry pi over the Sovol Klipper screen?