# Klipper shut off

**URL:** <https://forum.sovol3d.com/t/klipper-shut-off/6309>\
**Category:** Need Help\
**Created:** [December 19, 2024, 11:56am UTC](https://forum.sovol3d.com/t/klipper-shut-off/6309 "2024-12-19T11:56:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![edtineo](https://avatars.discourse-cdn.com/v4/letter/e/ce73a5/32.png) [@edtineo](https://forum.sovol3d.com/u/edtineo)\
**Post date:** [December 19, 2024, 11:56am UTC](https://forum.sovol3d.com/t/klipper-shut-off/6309/1 "2024-12-19T11:56:30Z")

</div>

![20241218_223937](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/2/2bb4ea4e9b669f01e7197ef9edb486accf1fae41.jpeg)  
 ![20241218_223941](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/d/dc55f862428d605c27954cfa2badbd04d7d835e0.jpeg)  
 ![20241218_225141](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/6/69369a8e872699fdf5cdab4bc67a8a8daa9eac0a.jpeg)  
hello, I recently had to replace the outlet switch because it failed. After replacing it I tried to bed level. the homing xy and was fine, but when i went to home z the head went to the center of bed and then went straight down and dug into bed and wouldn’t stop. I had to shut it off to stop it from digging in. the stepper motors where pushing down. so now I’m getting a few commands. as seen in pics about. the klipper is off and wont do something with MCU? i dont know what that is. and webhooks request on Orca slicer. I dont know. Anyone know what’s going on?