# \[KLIPPER\] Out of range error at end of print

**URL:** <https://forum.sovol3d.com/t/klipper-out-of-range-error-at-end-of-print/5297>\
**Category:** Sovol SV06 Plus\
**Tags:** klipper\
**Created:** [July 10, 2024, 7:16pm UTC](https://forum.sovol3d.com/t/klipper-out-of-range-error-at-end-of-print/5297 "2024-07-10T19:16:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sparkn34](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@sparkn34](https://forum.sovol3d.com/u/sparkn34)\
**Post date:** [July 10, 2024, 7:16pm UTC](https://forum.sovol3d.com/t/klipper-out-of-range-error-at-end-of-print/5297/1 "2024-07-10T19:16:11Z")

</div>

I have had my sv06 plus for a couple weeks. I just put on the upgraded sovol klipper screen and have been getting a out of range error at the end of every print. I have tried it a couple times and it happens every time. Im very new to all this and wanted to try and get some info on how to fix it.

---

<div class="post-metadata">

**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\
**Post date:** [November 14, 2024, 8:17am UTC](https://forum.sovol3d.com/t/klipper-out-of-range-error-at-end-of-print/5297/2 "2024-11-14T08:17:24Z")

</div>

I think you need to check the position\_max settings for your Z-axis in the config