# Killed: Printer Halted

**URL:** <https://forum.sovol3d.com/t/killed-printer-halted/351>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [June 10, 2022, 2:04pm UTC](https://forum.sovol3d.com/t/killed-printer-halted/351 "2022-06-10T14:04:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kurtis](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@Kurtis](https://forum.sovol3d.com/u/Kurtis)\
**Post date:** [June 10, 2022, 2:04pm UTC](https://forum.sovol3d.com/t/killed-printer-halted/351/1 "2022-06-10T14:04:11Z")

</div>

Hi folks! I hope all is well with you! So, I assembled my SV03 printer, plugged it in. Then I turned it on. Right away there was a loud beep, and the screen says Killed: Printer Halted-Please Reset.  
Does anyone know how to reset/fix this issue?

---

<div class="post-metadata">

**Author:** ![Kurtis](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@Kurtis](https://forum.sovol3d.com/u/Kurtis)\
**Post date:** [June 10, 2022, 10:56pm UTC](https://forum.sovol3d.com/t/killed-printer-halted/351/2 "2022-06-10T22:56:44Z")

</div>

Okay so we change the settings from Sovol SV01 to Sovol SV03. Is it something in the G code maybe?

---

<div class="post-metadata">

**Author:** ![Ciol](https://avatars.discourse-cdn.com/v4/letter/c/e274bd/32.png) [@Ciol](https://forum.sovol3d.com/u/Ciol)\
**Post date:** [June 11, 2022, 2:55am UTC](https://forum.sovol3d.com/t/killed-printer-halted/351/3 "2022-06-11T02:55:52Z")

</div>

HI Kurtis,

Sorry your 2 posted confused me.

Is it happening when you power on the printer or is it when you try to print a gcode file?

---

<div class="post-metadata">

**Author:** ![Kurtis](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@Kurtis](https://forum.sovol3d.com/u/Kurtis)\
**Post date:** [June 11, 2022, 3:40am UTC](https://forum.sovol3d.com/t/killed-printer-halted/351/4 "2022-06-11T03:40:54Z")

</div>

As soon as I power it up. In fact, it occurred before I tried to upload the Cura program! Lol! I managed to upload cura and change Sovol SV01 to Sovol SV03, and enter the settings. That is as far as I got.

---

<div class="post-metadata">

**Author:** ![Kurtis](https://avatars.discourse-cdn.com/v4/letter/k/7ab992/32.png) [@Kurtis](https://forum.sovol3d.com/u/Kurtis)\
**Post date:** [June 11, 2022, 3:42am UTC](https://forum.sovol3d.com/t/killed-printer-halted/351/5 "2022-06-11T03:42:43Z")

</div>

I understand these things happen with these machines. It is a part of the learning curve. However, unlike most things it is not ALWAYS a Google search away. LMAO! I have a Creality Ender 3 Pro to assemble… but I am counting on this build volume. I have to make it work. Sovol should publish a technical book about this stuff.