# Is there a macro for the M600 command for the Sovol Zero somewhere?

**URL:** https://forum.sovol3d.com/t/is-there-a-macro-for-the-m600-command-for-the-sovol-zero-somewhere/8217
**Category:** Sovol Zero
**Created:** [July 8, 2025, 8:50pm UTC](https://forum.sovol3d.com/t/is-there-a-macro-for-the-m600-command-for-the-sovol-zero-somewhere/8217 "2025-07-08T20:50:33Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)
#### Post date: [July 8, 2025, 8:50pm UTC](https://forum.sovol3d.com/t/is-there-a-macro-for-the-m600-command-for-the-sovol-zero-somewhere/8217/1 "2025-07-08T20:50:33Z")

</div>

I am new to Klipper but want to print some multicolor items with filament change during prints.

I saw that you can go to the layer, where you want the change in the Orcaslicher and then insert an M600 command.

But Klipper needs a macro to give the printer the step by step commands for this case.

Anyone did one for the Zero already?

---

<div class="post-metadata">

### Author: ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)
#### Post date: [July 8, 2025, 11:16pm UTC](https://forum.sovol3d.com/t/is-there-a-macro-for-the-m600-command-for-the-sovol-zero-somewhere/8217/2 "2025-07-08T23:16:20Z")

</div>

The stock configuration supports M600. The code is in macro.cfg which is “included” from printer.cfg

Verify your Orca Slicer has

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/2/2cb05bdb0225b221dcb4e6b6819118e3e4a7e81b.png)

There has been several issues with “machine G-code” for various functions.