# Is SV06 All Metal Planetary Direct Drive Extruder Complete?

**URL:** <https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** solved\
**Created:** [February 11, 2023, 2:45am UTC](https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622 "2023-02-11T02:45:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\
**Post date:** [February 11, 2023, 2:45am UTC](https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622/1 "2023-02-11T02:45:35Z")

</div>

@sovol3d - I would like to purchase a pair of the SV06 All Metal Planetary Direct Drive Extruder kits so that I can preinstall different nozzles for different job types. This will prevent me from constantly removing and replacing nozzles on my existing Extruder assembly.

Is the kit as supplied a full replacement for the existing assembly? In other words, can I simply unplug the ribbon cable, remove the 3 screws, swap assemblies, replace the screws and the ribbon cable without the need for additional parts?

Tim

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [February 11, 2023, 3:49am UTC](https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622/2 "2023-02-11T03:49:54Z")

</div>

Hi @Timpraetor As what’ve I’ve been informed, yes. The kit is a full replacement for the existing assembly that you could simply unplug, swap, and replace without the need for additional parts.

---

<div class="post-metadata">

**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\
**Post date:** [March 24, 2023, 7:36pm UTC](https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622/3 "2023-03-24T19:36:37Z")

</div>

My secondary extruder assembly arrived today, so I can now keep my 0.6 and 0.2 nozzles engaged and just swap tool heads.

Now, just awaiting my SV06 Plus!

Tim

---

<div class="post-metadata">

**Author:** ![nazghul](https://avatars.discourse-cdn.com/v4/letter/n/8797f3/32.png) [@nazghul](https://forum.sovol3d.com/u/nazghul)\
**Post date:** [September 30, 2023, 11:25pm UTC](https://forum.sovol3d.com/t/is-sv06-all-metal-planetary-direct-drive-extruder-complete/1622/4 "2023-09-30T23:25:27Z")

</div>

…and now the same question regarding the SV07. When will we be able to buy print heads for the SV07 (I already managed to rip a nozzle within the hotend and had to buy a replacement ☹ )