# Installation script for Guppy Screen on SV06 ACE

**URL:** <https://forum.sovol3d.com/t/installation-script-for-guppy-screen-on-sv06-ace/9498>\
**Category:** Sovol SV06 ACE\
**Tags:** firmware\
**Created:** [February 2, 2026, 2:59pm UTC](https://forum.sovol3d.com/t/installation-script-for-guppy-screen-on-sv06-ace/9498 "2026-02-02T14:59:39Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [February 3, 2026, 3:40pm UTC](https://forum.sovol3d.com/t/installation-script-for-guppy-screen-on-sv06-ace/9498/8 "2026-02-03T15:40:50Z")

</div>

Thanks for the pictures! That helps me visualize it much better. I’m currently testing Knomi from Bigtreetech with the SV06 Plus ACE. It’s connected to the printer via Wi-Fi only. It’s a small status indicator with a lot of potential.

> [@Bigtreetech Knomi](https://forum.sovol3d.com/t/bigtreetech-knomi/9484/):
>
> Bigtreetech Knomi I bought a Knomi for another printer. They’re available for various printers like Voron, BambuLab, and Creality. I’ve even seen them for individual Sovol printers. As long as you can get your hands on the Klipper, it can be used with any printer. To explain: It’s an ESP32 with Wi-Fi and a small touchscreen. It’s powered by 5V via PIN or USB-C. The Knomi also has a temperature and humidity sensor, accelerometer, I²C interface, and a camera connection. So it’s packed with featu…

---

_[View the full topic](https://forum.sovol3d.com/t/installation-script-for-guppy-screen-on-sv06-ace/9498)._