# I will chime cash to someone who can help ... z wont home sv03 !please

**URL:** <https://forum.sovol3d.com/t/i-will-chime-cash-to-someone-who-can-help-z-wont-home-sv03-please/614>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [September 26, 2022, 5:17pm UTC](https://forum.sovol3d.com/t/i-will-chime-cash-to-someone-who-can-help-z-wont-home-sv03-please/614 "2022-09-26T17:17:10Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![keffersales7807](https://avatars.discourse-cdn.com/v4/letter/k/e495f1/32.png) [@keffersales7807](https://forum.sovol3d.com/u/keffersales7807)\
**Post date:** [September 26, 2022, 5:17pm UTC](https://forum.sovol3d.com/t/i-will-chime-cash-to-someone-who-can-help-z-wont-home-sv03-please/614/1 "2022-09-26T17:17:10Z")

</div>

ok so if someone can help i am happy to pay…sv03 it worked fine and has only been used a few times and worked great . then i stopped a print but never aborted it and shut printer off …now it acts funny …x and y auto home , z just flashes with ?? on lcd , if i go to level corners it says homing xyz on lcd and just stays like that until i power it off. the z axis stays about 9 inches up and does not lower , the bl touch sensor blinks always , probe test does not work …i have tried a bunch of gcode commands on cura and nothing …i am not good at thi and have been trying so hard but at this point if someone can help i would appreciate it or i will have to sell it …thank you lenny … you can text me incase i dont receive msg from the forum because i just signed up 272 788 1429