# I need help finding a slicer for browser

**URL:** <https://forum.sovol3d.com/t/i-need-help-finding-a-slicer-for-browser/4777>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** advice\
**Created:** [March 27, 2024, 2:17am UTC](https://forum.sovol3d.com/t/i-need-help-finding-a-slicer-for-browser/4777 "2024-03-27T02:17:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Da-bros](https://avatars.discourse-cdn.com/v4/letter/d/57b2e6/32.png) [@Da-bros](https://forum.sovol3d.com/u/Da-bros)\
**Post date:** [March 27, 2024, 2:17am UTC](https://forum.sovol3d.com/t/i-need-help-finding-a-slicer-for-browser/4777/1 "2024-03-27T02:17:33Z")

</div>

so I use AstroPrint as my slicer but it is not the best and cannot do multicolor I can not do any software that needs downloading because I do this on a Chromebook and this is the only browser-based software that I think is fine but all the good ones require downloading.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [March 27, 2024, 2:36pm UTC](https://forum.sovol3d.com/t/i-need-help-finding-a-slicer-for-browser/4777/2 "2024-03-27T14:36:04Z")

</div>

Hi,  
I know that IceSL is quite popular but it is too complicated for me.  
I prefer software like IdeaMaker or Superslicer.

---

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [July 30, 2025, 3:12pm UTC](https://forum.sovol3d.com/t/i-need-help-finding-a-slicer-for-browser/4777/3 "2025-07-30T15:12:46Z")

</div>

> [@Da-bros](#):
>
> cannot do multicolor

On the stock SV06 “multicolor” requires manual filament changes. Have you added a multi filament changer to your machine?

> [@mich0111](#):
>
> I know that IceSL is quite popular

IceSL looks to be quite powerful but the web version does not have a profile for the SV06. There are instructions for creating one but it’s not a simple process.

Which slicing engine do you use at Astroprint? It would be easy enough to edit the g-code files once downloaded. Insert M600 (Filament Change) lines at the layers where you want to change color.