# I keep discovering quirks in the sv08 configuration

**URL:** <https://forum.sovol3d.com/t/i-keep-discovering-quirks-in-the-sv08-configuration/6380>\
**Category:** Sovol SV08\
**Created:** [December 28, 2024, 9:12pm UTC](https://forum.sovol3d.com/t/i-keep-discovering-quirks-in-the-sv08-configuration/6380 "2024-12-28T21:12:41Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![biggy238](https://avatars.discourse-cdn.com/v4/letter/b/a587f6/32.png) [@biggy238](https://forum.sovol3d.com/u/biggy238)\
**Post date:** [December 29, 2024, 9:52pm UTC](https://forum.sovol3d.com/t/i-keep-discovering-quirks-in-the-sv08-configuration/6380/3 "2024-12-29T21:52:06Z")

</div>

My post about the macro.cfg might be within the scope of your wiki?

> [@Modified Macro.cfg for maintaining bed temp during QGL, ZOFFSET, BED\_MESH](https://forum.sovol3d.com/t/modified-macro-cfg-for-maintaining-bed-temp-during-qgl-zoffset-bed-mesh/6389):
>
> I’m attaching my modified version of SV08 Macro.cfg This file allows the machine to perform the start print macro while maintaining the bed temp specified in the gcode without cycling down during the calibrations. I also verified that the calibrations can be completed after a cold soak by issuing the calibration commands and they default to 65 as expected. I cleaned up some of the spelling errors elsewhere in the file. (targer vs. target, e\_restract vs e\_retract) WARNING: I make no claims tha…

---

_[View the full topic](https://forum.sovol3d.com/t/i-keep-discovering-quirks-in-the-sv08-configuration/6380)._