# I can not connect to SV07Plus via Orca slicer

**URL:** <https://forum.sovol3d.com/t/i-can-not-connect-to-sv07plus-via-orca-slicer/4636>\
**Category:** Sovol SV07 Plus\
**Created:** [March 3, 2024, 5:07pm UTC](https://forum.sovol3d.com/t/i-can-not-connect-to-sv07plus-via-orca-slicer/4636 "2024-03-03T17:07:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jollyro](https://avatars.discourse-cdn.com/v4/letter/j/e79b87/32.png) [@Jollyro](https://forum.sovol3d.com/u/Jollyro)\
**Post date:** [March 3, 2024, 5:07pm UTC](https://forum.sovol3d.com/t/i-can-not-connect-to-sv07plus-via-orca-slicer/4636/1 "2024-03-03T17:07:29Z")

</div>

I can not connect to SV07Plus via Orca slicer but I can connect via my Browser. Orca tells me the printer refuses to connect (error 7) The printer is connected to my network, I use the right address, I see it on my Browser and can access it, so what is wrong with the slicer connection? Any Ideas?

---

<div class="post-metadata">

**Author:** ![Oregonsquatter](https://avatars.discourse-cdn.com/v4/letter/o/b5a626/32.png) [@Oregonsquatter](https://forum.sovol3d.com/u/Oregonsquatter)\
**Post date:** [March 8, 2024, 1:20pm UTC](https://forum.sovol3d.com/t/i-can-not-connect-to-sv07plus-via-orca-slicer/4636/2 "2024-03-08T13:20:00Z")

</div>

Does your computer or other device have a VPN running? That’s what kept me from connecting the two. Hope this works for you 🙂

---

<div class="post-metadata">

**Author:** ![Jollyro](https://avatars.discourse-cdn.com/v4/letter/j/e79b87/32.png) [@Jollyro](https://forum.sovol3d.com/u/Jollyro)\
**Post date:** [March 16, 2024, 8:08pm UTC](https://forum.sovol3d.com/t/i-can-not-connect-to-sv07plus-via-orca-slicer/4636/3 "2024-03-16T20:08:35Z")

</div>

Nope. But I could fix it. Do not put HTTPS:// in the address line.