# How to do a factory reset

**URL:** <https://forum.sovol3d.com/t/how-to-do-a-factory-reset/3584>\
**Category:** Sovol Klipperized SV07\
**Tags:** firmware\
**Created:** [September 29, 2023, 10:52pm UTC](https://forum.sovol3d.com/t/how-to-do-a-factory-reset/3584 "2023-09-29T22:52:59Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\
**Post date:** [September 30, 2023, 2:18pm UTC](https://forum.sovol3d.com/t/how-to-do-a-factory-reset/3584/2 "2023-09-30T14:18:17Z")

</div>

This may not be related to the firmware but rather to a cooling issue with the control unit. The SoC chip is behind the LCD and only has a very shallow heat sink installed. That is then pointed down at the mount plate with less than 3mm of space for airflow. I’ve also started seeing these Klipper halt messages and I’ve just installed a fresh-from-Sovol EMMC card.

See [Is the SV07 Mainboard undercooled?](https://forum.sovol3d.com/t/is-the-sv07-mainboard-undercooled/3589)

Tim

---

_[View the full topic](https://forum.sovol3d.com/t/how-to-do-a-factory-reset/3584)._