# Hoping for some info on settings **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [May 23, 2023, 4:02am UTC](https://forum.sovol3d.com/t/hoping-for-some-info-on-settings/2655 "2023-05-23T04:02:58Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![cdromce](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdromce](https://forum.sovol3d.com/u/cdromce)\ **Post date:** [May 23, 2023, 4:02am UTC](https://forum.sovol3d.com/t/hoping-for-some-info-on-settings/2655/1 "2023-05-23T04:02:58Z")
Hi got my new sovol sv06 plus and have been doing some prints with a profile I found on youtube. the profile has speed set at 150mm and the benchy came out perfect , so moved on to larger print and not sure what is happening here ![20230522_173034](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/c/ce055f471ef615f7c79b96f67cf8d10b3106edf6.jpeg) hoping someone can tell me why i am getting this strange it looks like layer missing or seperating at strange places on the model??? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [May 23, 2023, 11:33am UTC](https://forum.sovol3d.com/t/hoping-for-some-info-on-settings/2655/2 "2023-05-23T11:33:45Z")
Your printing too fast. Everybody wants speed…it’s faster, print has issues, slower print looks good…simple. As much as you probably don’t want to, slow down to 60-80mm. You have a lot of things going on in that print, so slower is better. If was just a square box with no detail, go fast. Once you start getting detail, you need to slow down. ---
**Author:** ![cdromce](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdromce](https://forum.sovol3d.com/u/cdromce)\ **Post date:** [May 23, 2023, 10:46pm UTC](https://forum.sovol3d.com/t/hoping-for-some-info-on-settings/2655/3 "2023-05-23T22:46:06Z")
Weirdly enough i change to prusia slicer and all my problems on the print are gone. But thank you i expected that might be the problem but it seems cura was the main culprit.