# Homeing problems

**URL:** <https://forum.sovol3d.com/t/homeing-problems/2270>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** advice\
**Created:** [April 13, 2023, 8:38pm UTC](https://forum.sovol3d.com/t/homeing-problems/2270 "2023-04-13T20:38:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MTBloch](https://avatars.discourse-cdn.com/v4/letter/m/5e9695/32.png) [@MTBloch](https://forum.sovol3d.com/u/MTBloch)\
**Post date:** [April 13, 2023, 8:38pm UTC](https://forum.sovol3d.com/t/homeing-problems/2270/1 "2023-04-13T20:38:16Z")

</div>

My SV06 has also started overnight running on X-axis, and my Z-offset. which used to be -1.720 now has to be set to -13.620 to reach the plate, I’ve tried reinstalling the firmware but it didn’t help  
[video](https://drive.google.com/file/d/1UfZUazNiOn2WYw0aXT_SDUsRduI8Gm1f/view?usp=sharing)