# Home positon shifted

**URL:** <https://forum.sovol3d.com/t/home-positon-shifted/1685>\
**Category:** Sovol SV04 IDEX\
**Tags:** solved\
**Created:** [February 15, 2023, 9:30am UTC](https://forum.sovol3d.com/t/home-positon-shifted/1685 "2023-02-15T09:30:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nkobra](https://avatars.discourse-cdn.com/v4/letter/n/b487fb/32.png) [@nkobra](https://forum.sovol3d.com/u/nkobra)\
**Post date:** [February 15, 2023, 9:30am UTC](https://forum.sovol3d.com/t/home-positon-shifted/1685/1 "2023-02-15T09:30:57Z")

</div>

Hello  
I had had some problems with PLV blocking in the extruder. when I solved this portable, the home positon of extruder dont work anymore. The x axis is shifted to the left for more than 7cm. when I push home button the X axe motor continue working while the axe is at the limite of its position.  
How can i solve this problem.  
Thank you

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [February 18, 2023, 1:17am UTC](https://forum.sovol3d.com/t/home-positon-shifted/1685/2 "2023-02-18T01:17:43Z")

</div>

hi @nkobra It would be much helpful to analyze if you don’t mind adding a photo of the issue.

---

<div class="post-metadata">

**Author:** ![nkobra](https://avatars.discourse-cdn.com/v4/letter/n/b487fb/32.png) [@nkobra](https://forum.sovol3d.com/u/nkobra)\
**Post date:** [February 18, 2023, 8:42am UTC](https://forum.sovol3d.com/t/home-positon-shifted/1685/3 "2023-02-18T08:42:54Z")

</div>

I found the solution  
The cable of extruder was detached and that causes the no detection of end of line by the LED of X axis moteur.  
Just putting back the cable solved the problem  
Thank you