# Helpful Tip for those getting new sv06 Ace Plus

**URL:** <https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077>\
**Category:** Sovol SV06 Plus ACE\
**Created:** [March 1, 2025, 8:50pm UTC](https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077 "2025-03-01T20:50:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![soloash](https://avatars.discourse-cdn.com/v4/letter/s/7ba0ec/32.png) [@soloash](https://forum.sovol3d.com/u/soloash)\
**Post date:** [March 1, 2025, 8:50pm UTC](https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077/1 "2025-03-01T20:50:42Z")

</div>

Just wanted to throw this out there for those who get this in the mail. It was probably more obvious to others but I missed it for a while. This is my first 3d printer.

The only foam visible right off is the larger foam rectangle in the photo, which I removed like the instructions say. Later, after having issues, I found the two small foam blocks wedged tightly between the bed and rail/belt on the Y axis. To some it might not be so obvious.

 ![sv06warning](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/c/c0a28eab506d3b5ffbe1cd32d22d3eba0938052f.jpeg)

---

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [March 1, 2025, 11:14pm UTC](https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077/2 "2025-03-01T23:14:50Z")

</div>

Yes. Sovol listened. This problem was very common on the SV06 ACE and now Sovol has included a note.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [March 2, 2025, 1:44pm UTC](https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077/3 "2025-03-02T13:44:08Z")

</div>

As you say, common and even systematic problem.

---

<div class="post-metadata">

**Author:** ![mechno](https://avatars.discourse-cdn.com/v4/letter/m/e99b99/32.png) [@mechno](https://forum.sovol3d.com/u/mechno)\
**Post date:** [March 5, 2025, 1:10am UTC](https://forum.sovol3d.com/t/helpful-tip-for-those-getting-new-sv06-ace-plus/7077/4 "2025-03-05T01:10:52Z")

</div>

I’m such a dummy. I took out the block and at first had those two little squares still wedged in there. AND THIS WAS AFTER WRITING THEM FOR CLARIFICATION