# Heating failure

**URL:** <https://forum.sovol3d.com/t/heating-failure/2918>\
**Category:** Sovol SV02\
**Created:** [June 23, 2023, 9:43pm UTC](https://forum.sovol3d.com/t/heating-failure/2918 "2023-06-23T21:43:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![straydogn84](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@straydogn84](https://forum.sovol3d.com/u/straydogn84)\
**Post date:** [June 23, 2023, 9:43pm UTC](https://forum.sovol3d.com/t/heating-failure/2918/1 "2023-06-23T21:43:25Z")

</div>

help with sovol sv02. when trying to heat up, a message on the display screen reads:

Heating Failed. cycle power! Target temperature was not met on nozzle or bed soon enough. Inspect and verify ambient conditions are suitable for printing. Did the heating element/hotend go bad and need replaced? It will not heat up anymore.