# Heatbreak replacement
**URL:** https://forum.sovol3d.com/t/heatbreak-replacement/1214
**Category:** Sovol SV06 Fully Open Source 3D Printer
**Tags:** solved
**Created:** [January 4, 2023, 10:18am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214 "2023-01-04T10:18:33Z")
**Posts on this page:** 14
**Page:** 1
### Author:  [@Heavy](https://forum.sovol3d.com/u/Heavy)
#### Post date: [January 4, 2023, 10:18am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/1 "2023-01-04T10:18:33Z")
Where can I buy heatbreaks for the SV06? Are there any suitable ones from third-party suppliers?
---
### Author:  [@sovol3d](https://forum.sovol3d.com/u/sovol3d)
#### Post date: [January 5, 2023, 11:18am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/2 "2023-01-05T11:18:22Z")
We have the all metal hotend kits on official website: [SV06 All Metal Hotend | Sovol3d](https://sovol3d.com/products/sv06-all-metal-hotend?_pos=2&_sid=8f39ab00a&_ss=r)
---
### Author:  [@SV06-User](https://forum.sovol3d.com/u/SV06-User)
#### Post date: [January 5, 2023, 12:02pm UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/3 "2023-01-05T12:02:05Z")
He is looking for heatbreaks only which are very hard to swap because sovol glue them in. Any chance to disassemble the whole block ?
Grüße aus Germany 🙂
Marty
---
### Author:  [@Heavy](https://forum.sovol3d.com/u/Heavy)
#### Post date: [January 5, 2023, 12:07pm UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/4 "2023-01-05T12:07:27Z")
Exactly, only the heatbreak. Why should I channge the whole hotend when I need a new heatbreak? You offer heatbreaks for your other 3d printers,too.
Furthermore the hot ends are sold out at the moment.
---
### Author:  [@bassamanator](https://forum.sovol3d.com/u/bassamanator)
#### Post date: [January 6, 2023, 7:31am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/5 "2023-01-06T07:31:08Z")
I sincerely hope that you’re wrong about this. How would they expect you to install a new hotend if the heatbreak was glued in? Likely, there is some thermal paste in place which might be making your heatbreak difficult to remove.
---
### Author:  [@SV06-User](https://forum.sovol3d.com/u/SV06-User)
#### Post date: [January 6, 2023, 11:09am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/6 "2023-01-06T11:09:45Z")
Glued in … but I was able to peel it off an get it out with enough heat from a heat gun.
---
### Author:  [@bassamanator](https://forum.sovol3d.com/u/bassamanator)
#### Post date: [January 6, 2023, 5:14pm UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/7 "2023-01-06T17:14:57Z")
Thank you for this! Are the thermistor and heater cartridge also glued in?
Extremely disappointing behaviour from Sovol3d.
---
### Author:  [@SV06-User](https://forum.sovol3d.com/u/SV06-User)
#### Post date: [January 6, 2023, 5:56pm UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/8 "2023-01-06T17:56:10Z")
Yes … but not as hard as the heatbreak
---
### Author:  [@sovol3d](https://forum.sovol3d.com/u/sovol3d)
#### Post date: [January 7, 2023, 9:15am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/9 "2023-01-07T09:15:13Z")
We have a plan for selling only the heatbreak. But now due to the expensive shipping fee, we sell the whole hotend. Sorry for causing you trouble.
---
### Author:  [@Heavy](https://forum.sovol3d.com/u/Heavy)
#### Post date: [January 7, 2023, 10:59am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/10 "2023-01-07T10:59:32Z")
Make a package of two or three heatbreaks like this:
> **[Bi-metal Heat Break for SV04/SV01PRO/SV05 3D Printer 3pcs](https://sovol3d.com/collections/fdm-parts/products/bi-metal-heat-break-for-sv04-sv01pro-3d-printer)**
>
> Notice: Doesn't compatible with SV06Material: copper alloy and titanium alloyPackage： 3 pcs a pack
---
### Author:  [@Guyguyguis](https://forum.sovol3d.com/u/Guyguyguis)
#### Post date: [February 3, 2023, 2:19pm UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/11 "2023-02-03T14:19:13Z")
Would those not work on the SV06?
---
### Author:  [@transistor1](https://forum.sovol3d.com/u/transistor1)
#### Post date: [February 5, 2023, 1:54am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/12 "2023-02-05T01:54:56Z")
Hey @SV06-User could you please provide more detail on how you heated it, temp, how you got the nozzle off, etc? I have a soldering rework station and I’d like to change the nozzle.
@sovol3d can you provide official info on how we can remove the nozzle? You provided an extra nozzle and a wrench that is the size of the nozzle so I assume you expected us to be able to do that. I would like to use a hardened steel nozzle.
Edit:
Never mind!
[ ](https://www.youtube.com/watch?v=B0Kz2Hi6jxc)
---
### Author:  [@Jens](https://forum.sovol3d.com/u/Jens)
#### Post date: [March 29, 2023, 6:34am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/13 "2023-03-29T06:34:37Z")
How is the heatbreak fixed?
Is there a screw somewhere?
---
### Author:  [@ImTheLiquor](https://forum.sovol3d.com/u/ImTheLiquor)
#### Post date: [March 30, 2023, 11:46am UTC](https://forum.sovol3d.com/t/heatbreak-replacement/1214/14 "2023-03-30T11:46:01Z")
It’s screwed into the heater block and glued into place.