# Has anyone added a Filament Runout Sensor to their SV06

**URL:** <https://forum.sovol3d.com/t/has-anyone-added-a-filament-runout-sensor-to-their-sv06/1290>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [January 12, 2023, 3:57pm UTC](https://forum.sovol3d.com/t/has-anyone-added-a-filament-runout-sensor-to-their-sv06/1290 "2023-01-12T15:57:42Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![jmfsanjurjo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jmfsanjurjo/32/750_2.png) [@jmfsanjurjo](https://forum.sovol3d.com/u/jmfsanjurjo)\
**Post date:** [April 16, 2023, 5:36pm UTC](https://forum.sovol3d.com/t/has-anyone-added-a-filament-runout-sensor-to-their-sv06/1290/7 "2023-04-16T17:36:44Z")

</div>

> [@Compatible filament runout sensor for SV06](https://forum.sovol3d.com/t/1898/5):
>
> Hello I have connected it as I describe in the pdf but I bought a sensor for ender 3 and I had to modify it. Check that the Ground pin of the sensor is the normally open NO of the switch. Add filament sensor with LED to Sovol SV06 In order to add a filament sensor to our Sovol SV06 3d printer we will need a three-wire cable with a 1.25 mm three-pin MOLEX female connector (Micro JST 1.25 Mm) and a three-pin JST-XH female connector of 2.54mm in addition to the filament sensor.

---

_[View the full topic](https://forum.sovol3d.com/t/has-anyone-added-a-filament-runout-sensor-to-their-sv06/1290)._