# Good printer

**URL:** <https://forum.sovol3d.com/t/good-printer/7014>\
**Category:** Sovol SV06 Plus ACE\
**Created:** [February 23, 2025, 3:37pm UTC](https://forum.sovol3d.com/t/good-printer/7014 "2025-02-23T15:37:50Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\
**Post date:** [February 24, 2025, 8:20pm UTC](https://forum.sovol3d.com/t/good-printer/7014/4 "2025-02-24T20:20:48Z")

</div>

Can everyone find the solutions to the problems in the SV06 ACE area or do we need an overview?

Only the “Deprecated Klipper Option” needs a small adjustment. The value changes to 0.67 because the “max\_accel” is 15,000. The entry here must be “minimum\_cruise\_ratio: 0.67”.

The Orca profiles have already been revised by Orca and should appear with version 2.3.0.

The error messages for arc mode can be eliminated with an entry in the printer.cfg.

```auto
[gcode_arcs]
resolution: 0.25
# An arc will be split into segments. Each segment's length will
# equal the resolution in mm set above. Lower values will produce a
# finer arc, but also more work for your machine. Arcs smaller than
# the configured value will become straight lines. The default is
# 1mm.

```

The LED is also blocked by the display here and cannot be switched in the web interface.

All small things, but they could have been fixed.

---

_[View the full topic](https://forum.sovol3d.com/t/good-printer/7014)._