# Glass bed on the SV04

**URL:** <https://forum.sovol3d.com/t/glass-bed-on-the-sv04/253>\
**Category:** Sovol SV04 IDEX\
**Created:** [May 6, 2022, 2:57pm UTC](https://forum.sovol3d.com/t/glass-bed-on-the-sv04/253 "2022-05-06T14:57:19Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [November 17, 2022, 7:53pm UTC](https://forum.sovol3d.com/t/glass-bed-on-the-sv04/253/12 "2022-11-17T19:53:10Z")

</div>

Hi there,  
the printing bed surface of my SV04 worked well just for a few days. Despite exact bed leveling & cleaning my prints warped or did not even stick to surface without any extra adhesion stuff.  
I had been using a FR4 fiberglass plate on my SV01 printer for years without any adhesion issues at all. Therefore I got rid it of that pesky bed coating & put a matching 1mm FR4 plate to the metal plate instead. The bed coating was easy to remove with a hot-air gun. The remaining glue on the metal plate was sufficient in means of smoothness & adhesiveness to keep the FR4 plate in place without any other adhesive. It sticks even during bending the plate when removing prints from it.

/R  
Bjoern

---

_[View the full topic](https://forum.sovol3d.com/t/glass-bed-on-the-sv04/253)._