# Gantry binding/clunking at specific height

**URL:** <https://forum.sovol3d.com/t/gantry-binding-clunking-at-specific-height/9921>\
**Category:** Sovol SV08\
**Created:** [April 24, 2026, 3:07am UTC](https://forum.sovol3d.com/t/gantry-binding-clunking-at-specific-height/9921 "2026-04-24T03:07:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JDBrown](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@JDBrown](https://forum.sovol3d.com/u/JDBrown)\
**Post date:** [April 24, 2026, 3:07am UTC](https://forum.sovol3d.com/t/gantry-binding-clunking-at-specific-height/9921/1 "2026-04-24T03:07:32Z")

</div>

My SV08’s gantry seems to bind or hesitate and make a clunking sound at a height of around 15mm. I don’t see anything stuck to the rails or anything. Any idea what I should look for?

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [April 24, 2026, 4:24am UTC](https://forum.sovol3d.com/t/gantry-binding-clunking-at-specific-height/9921/2 "2026-04-24T04:24:44Z")

</div>

After watching the video 4-5 times, it’s sticking at the left rear corner…I have it circled & a line going to the screw on the back rail. It might not be this screw, but it does catch something when that screw is in the middle of the gantry. So concentrate on the rear left corner.

 ![Capture](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/bd63fb703eb5825b0aa2b4c0ac21aa9f8c073081.jpeg)

---

<div class="post-metadata">

**Author:** ![JDBrown](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@JDBrown](https://forum.sovol3d.com/u/JDBrown)\
**Post date:** [April 24, 2026, 11:54pm UTC](https://forum.sovol3d.com/t/gantry-binding-clunking-at-specific-height/9921/3 "2026-04-24T23:54:41Z")

</div>

I focused in on that back left corner, and it turned out the screws holding on the back of the enclosure were just a bit too long. I swapped them out with some shorter ones, and the binding is gone!
