# Firmware v 1.1.5 **URL:** \ **Category:** Sovol SV06 Plus\ **Tags:** firmware\ **Created:** [May 24, 2023, 3:16pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670 "2023-05-24T15:16:45Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [May 24, 2023, 3:16pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/1 "2023-05-24T15:16:45Z")
My SV06 plus shipped with version 1.1.5 firmware - I misread the date and believed that the firmware on the website was newer so I flashed it and found the current version of firmware on Sovol’s website is older than the shipped firmware. (version 1.1.4 vs 1.1.5). I have reached out to support via email but have not had any response yet - is there a timeline for uploading the latest firmware and any reason the latest version is not posted online? I am having some printing issues as well as slicer/g-code weirdness and I would like to rule out old/early firmware as an issue. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [May 24, 2023, 3:38pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/2 "2023-05-24T15:38:36Z")
I haven’t seen anyone post anything about a newer Plus firmware. As far as I know 2.23 is the latest (1.1.4 on the screen). It usually takes Sovol anywhere from 2 days to a week to answer. If you join the Facebook group, you might know something today or tomorrow. ---
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [May 24, 2023, 5:29pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/3 "2023-05-24T17:29:23Z")
Thanks for the reply - I don’t use facebook unfortunately, support seems to be very hit and miss. I did get reasonably quick replies regarding my order and ship date etc. but not even acknowledgement of 3 emails on this and other mechanical issues i’ve had with the printer (y-axis stepper misalignement, linear bearings sticking - not just noise but sticking after greasing). Image of 1.1.5 firmware below. ![IMG_20230519_125346](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/6/69579be5d0f875e1aaefd1e6f9fa694aad18a066.jpeg) ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [May 24, 2023, 6:16pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/4 "2023-05-24T18:16:48Z")
I don’t use Facebook either. I knew there was a Beta version floating around, other then that…I have no info. Here is a screenshot of mine. ![PXL_20230414_065603303](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/e/e17195ec39c918645474bc2cffdd269232adc8db.jpeg) ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [May 25, 2023, 12:54am UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/5 "2023-05-25T00:54:06Z")
Dude, that sucks. email the TH3d dude. can’t vouch for it, but they do play hard with the paltform and have done custom firmware ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [May 25, 2023, 3:06pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/6 "2023-05-25T15:06:55Z")
I’m on 1.1.4, shipped from sovol us stock in april iirc. You might want to look for a marlin export command, Post it to the github what do you show for extruder esteps an driver currents? I was pushing a little over, just reset from 691.xx(27)? dropped it to 684. ---
**Author:** ![spannmagoo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/spannmagoo/32/1006_2.png) [@spannmagoo](https://forum.sovol3d.com/u/spannmagoo)\ **Post date:** [May 25, 2023, 6:10pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/7 "2023-05-25T18:10:38Z")
2.0.9.2 is the correct firmware they released. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [May 25, 2023, 6:50pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/8 "2023-05-25T18:50:12Z")
I didn’t post this the other day because it’s JMO… Sovol released the firmware right after the pre-orders started. When beater users started flashing the new firmware they posted that they were still on version 1.1.4. I think all Sovol did was fix the number to 1.1.5 but it’s the same build. Like I said, this is JMO…but yours is the 1st post I’ve seen that has mentioned having 1.1.5. ---
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [May 25, 2023, 8:47pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/9 "2023-05-25T20:47:43Z")
That’s the Marlin version? You can have multiple versions of firware and updates based on the same version of Marlin? ---
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [May 25, 2023, 8:48pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/10 "2023-05-25T20:48:38Z")
I calibrated e-steps manually - it was pretty close from factory but I don’t know what it was originally now. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [May 25, 2023, 9:03pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/11 "2023-05-25T21:03:19Z")
Both of our pics show Marlin 2.0.9.2. ---
**Author:** ![spannmagoo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/spannmagoo/32/1006_2.png) [@spannmagoo](https://forum.sovol3d.com/u/spannmagoo)\ **Post date:** [May 27, 2023, 3:47pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/12 "2023-05-27T15:47:45Z")
If you have 2.0.9.2 you are fine. Wait about a month and the plus will be in the latest Marlin bugfix. ---
**Author:** ![dwtc3d](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@dwtc3d](https://forum.sovol3d.com/u/dwtc3d)\ **Post date:** [June 3, 2023, 1:28pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/13 "2023-06-03T13:28:40Z")
Could this be the screen firmware version? There is a note about that on the download page I have 2 Pluses and one has 1.1.4 the other 1.1.5 just got the 2nd one that says 1.1.5 ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [June 4, 2023, 11:34pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/14 "2023-06-04T23:34:41Z")
I was doing some poking around,… In the slicer (prusaslicer, the one that does not leave me looking for a baby to punch after 2 minutes) there is a dropdown for firmware flavor, marlin legacy is default checked, but a Marlin2 choice avails. we can use that, yea? ---
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [June 5, 2023, 10:44am UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/15 "2023-06-05T10:44:17Z")
yes it’s marlin 2 for SV06+ ---
**Author:** ![niallof](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@niallof](https://forum.sovol3d.com/u/niallof)\ **Post date:** [June 5, 2023, 10:45am UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/16 "2023-06-05T10:45:36Z")
It could be - Sovol support came back and said 1.1.4 is the latest version… no more details than that and no explanation as to the difference in what I received from factory. Had to ask several times to get that minimum answer so idk. Maybe a language/localisation varient ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [June 5, 2023, 10:58am UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/17 "2023-06-05T10:58:59Z")
There was a video posted from a Facebook user that they were testing a Beta Firmware a while back, most likely this is the mysterious 1.1.5. ---
**Author:** ![DBMandrake](https://avatars.discourse-cdn.com/v4/letter/d/439d5e/32.png) [@DBMandrake](https://forum.sovol3d.com/u/DBMandrake)\ **Post date:** [July 1, 2023, 11:11pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/18 "2023-07-01T23:11:30Z")
My brand new SV06 Plus (ordered just over a week ago) came with V1.1.5, however I accidentally flashed it down to V1.1.4 as the firmware update on the website only gave a date not a version number, and I stupidly assumed the version on the website would be the latest. (Otherwise I wouldn’t have bothered to flash it) ---
**Author:** ![DBMandrake](https://avatars.discourse-cdn.com/v4/letter/d/439d5e/32.png) [@DBMandrake](https://forum.sovol3d.com/u/DBMandrake)\ **Post date:** [July 9, 2023, 7:57pm UTC](https://forum.sovol3d.com/t/firmware-v-1-1-5/2670/19 "2023-07-09T19:57:57Z")
Sovol eventually got back to me with a one line reply that wasn’t very helpful but I was able to get a copy of V1.1.5 from here instead: > **[Crosslink Firmware Factory](https://www.firmwarefactory.net/Marlin)** > > Web site created using create-react-app The V1.1.5 firmware source code is available from Sovol on Github at [GitHub - Sovol3d/SV06-PLUS: The fully open source for the SV06 Plus Includes the stl file，step files, firmware source code, icon image for the SV06 Plus. please check sovol3d repository here](https://github.com/Sovol3d/SV06-PLUS) and I made a decent attempt at compiling it myself using Visual Studio Code but got stuck on one compile error that I couldn’t figure out in the amount of time I was willing to spend on it. firmwarefactory lets you compile your own firmware from source and has all the compiler toolchains etc set up - however there was already a precompiled V1.1.5 firmware for the SV06 Plus - I’ve been running this version for about a week now and it seems good. As Sovol didn’t post the firmware on Github until V1.1.5 I don’t know what the actual changes between V1.1.4 and V1.1.5 are, but I do know my printer shipped with V1.1.5.