# \[Firmware modification request\] Moving the nozzle when purge when replacing the filament

**URL:** https://forum.sovol3d.com/t/firmware-modification-request-moving-the-nozzle-when-purge-when-replacing-the-filament/2934
**Category:** Firmware
**Created:** [June 26, 2023, 2:30am UTC](https://forum.sovol3d.com/t/firmware-modification-request-moving-the-nozzle-when-purge-when-replacing-the-filament/2934 "2023-06-26T02:30:02Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![shin](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/shin/32/1197_2.png) [@shin](https://forum.sovol3d.com/u/shin)
#### Post date: [June 26, 2023, 2:30am UTC](https://forum.sovol3d.com/t/firmware-modification-request-moving-the-nozzle-when-purge-when-replacing-the-filament/2934/1 "2023-06-26T02:30:02Z")

</div>

I have SV06 Firmware V2.0.0\_A

When changing filament colors, it is necessary to purge several times.

Purges in same place, extruded filaments pile up and contact the nozzle.

Please modify the firmware to moving the nozzle while purge!

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/bec23c57e14ea7f750082193a29711e68c4eb9a8.jpeg)