# Filament non sticking to the plate,

**URL:** <https://forum.sovol3d.com/t/filament-non-sticking-to-the-plate/4528>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [February 15, 2024, 2:31pm UTC](https://forum.sovol3d.com/t/filament-non-sticking-to-the-plate/4528 "2024-02-15T14:31:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![thierry](https://avatars.discourse-cdn.com/v4/letter/t/65b543/32.png) [@thierry](https://forum.sovol3d.com/u/thierry)\
**Post date:** [February 15, 2024, 2:31pm UTC](https://forum.sovol3d.com/t/filament-non-sticking-to-the-plate/4528/1 "2024-02-15T14:31:07Z")

</div>

Him my filament wont stick to the heating plate, it happened after regular printing.  
Temp is good, pla 210 heating bed 70, the filament start curling up and stick to the nozzle and ruin everything, any idea?  
thanks

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [February 16, 2024, 11:27am UTC](https://forum.sovol3d.com/t/filament-non-sticking-to-the-plate/4528/2 "2024-02-16T11:27:13Z")

</div>

> [@thierry](#):
>
> my filament wont stick to the heating plate, it happened after regular printing.  
> Temp is good, pla 210 heating bed 70, the filament start curling up and stick to the nozzle and ruin everything, any idea?  
> thanks

Hi,  
First of all, it seems to me that your temperatures are too high. 200 for the nozzle and 60 for the bed seem more correct to me. Then try using 3dlac to make it easier to hang on the bed.  
It’s a spray that looks like hairspray.  
Good luck

---

<div class="post-metadata">

**Author:** ![mako45](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mako45/32/1712_2.png) [@mako45](https://forum.sovol3d.com/u/mako45)\
**Post date:** [February 18, 2024, 11:48pm UTC](https://forum.sovol3d.com/t/filament-non-sticking-to-the-plate/4528/3 "2024-02-18T23:48:54Z")

</div>

Hi - I initially had trouble with filament not sticking, causing much trouble. Then I tried glue stick and have not had a problem since.  
I’m running a Sovol SV 07+ bed temp 60, nozzle 220 with PLA +.