# Filament feeder

**URL:** <https://forum.sovol3d.com/t/filament-feeder/9750>\
**Category:** Sovol SV08 MAX\
**Created:** [March 16, 2026, 11:56am UTC](https://forum.sovol3d.com/t/filament-feeder/9750 "2026-03-16T11:56:50Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Matt](https://avatars.discourse-cdn.com/v4/letter/m/a6a055/32.png) [@Matt](https://forum.sovol3d.com/u/Matt)\
**Post date:** [July 5, 2026, 11:02pm UTC](https://forum.sovol3d.com/t/filament-feeder/9750/8 "2026-07-05T23:02:27Z")

</div>

Velocity seems to be the setting which can quieten the buffer without affecting its ability to feed fresh filament. I put accel back to its default setting of 5000, & the filament fed fine from that point on. I now have velocity set to 30, rather than its default of 150. Doesn’t seem to have any adverse effect with regard to buffering/feeding, but it does make a notable difference to the noise level.

---

_[View the full topic](https://forum.sovol3d.com/t/filament-feeder/9750)._