# Extruder SV07

**URL:** <https://forum.sovol3d.com/t/extruder-sv07/4234>\
**Category:** Sovol SV07 Plus\
**Created:** [January 7, 2024, 3:11am UTC](https://forum.sovol3d.com/t/extruder-sv07/4234 "2024-01-07T03:11:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Americo](https://avatars.discourse-cdn.com/v4/letter/a/90db22/32.png) [@Americo](https://forum.sovol3d.com/u/Americo)\
**Post date:** [January 7, 2024, 3:11am UTC](https://forum.sovol3d.com/t/extruder-sv07/4234/1 "2024-01-07T03:11:55Z")

</div>

Good night dear!  
My SV07 Plus printer is not loading the filament, it stopped out of nowhere.  
Has anyone ever experienced this?  
Yours sincerely,

---

<div class="post-metadata">

**Author:** ![xxduffyxx](https://avatars.discourse-cdn.com/v4/letter/x/8baadc/32.png) [@xxduffyxx](https://forum.sovol3d.com/u/xxduffyxx)\
**Post date:** [January 7, 2024, 3:05pm UTC](https://forum.sovol3d.com/t/extruder-sv07/4234/2 "2024-01-07T15:05:09Z")

</div>

Did you have it running for awhile with filament loaded?

Take the extruder off and disassemble the hotend there is probably a small piece of filament jammed in the throat of the top of the hotend.

Gives you a chance to lubricate the extruder gears and clean them up too.

---

<div class="post-metadata">

**Author:** ![Z-Man](https://avatars.discourse-cdn.com/v4/letter/z/7ab992/32.png) [@Z-Man](https://forum.sovol3d.com/u/Z-Man)\
**Post date:** [April 5, 2024, 4:25pm UTC](https://forum.sovol3d.com/t/extruder-sv07/4234/3 "2024-04-05T16:25:36Z")

</div>

What can you use to lubricate the gears?