# Extruder Hits Print on my Sv06 **URL:** \ **Category:** Sovol SV06 Fully Open Source 3D Printer\ **Created:** [February 14, 2024, 1:23am UTC](https://forum.sovol3d.com/t/extruder-hits-print-on-my-sv06/4514 "2024-02-14T01:23:06Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Fallen\_Coop](https://avatars.discourse-cdn.com/v4/letter/f/d9b06d/32.png) [@Fallen\_Coop](https://forum.sovol3d.com/u/Fallen_Coop)\ **Post date:** [February 14, 2024, 1:23am UTC](https://forum.sovol3d.com/t/extruder-hits-print-on-my-sv06/4514/1 "2024-02-14T01:23:06Z")
I am printing then the extruder hits the print. I am using PLA at 60 bed temp, 195 nozzle temp, 100 fan speed. What do I do next? ---
**Author:** ![Fallen\_Coop](https://avatars.discourse-cdn.com/v4/letter/f/d9b06d/32.png) [@Fallen\_Coop](https://forum.sovol3d.com/u/Fallen_Coop)\ **Post date:** [February 14, 2024, 11:46pm UTC](https://forum.sovol3d.com/t/extruder-hits-print-on-my-sv06/4514/2 "2024-02-14T23:46:33Z")
Soo I took a video and this is what it looks like. [RPReplay\_Final1707954183.qt](https://forum.sovol3d.com/uploads/short-url/p2lAd4C8EtK2zmyv6uV0d76hQoH.qt) (7.0 MB) Is it a problem with Bed adhesion or something else? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [February 15, 2024, 1:11am UTC](https://forum.sovol3d.com/t/extruder-hits-print-on-my-sv06/4514/3 "2024-02-15T01:11:50Z")
That’s a Bed Adhesion issue. Clean your bed with IPA or soap & water. If it happens again, add some [Elmer’s Purple](https://www.amazon.com/Elmers-Disappearing-Purple-School-E520/dp/B001G9EBG8) to the plate. I couldn’t tell from the video if that was a brim or those little corner circles. Also, sometimes the time lapse will cause an issue…when the hotend moves back, sometimes it will ooze filament. This will cause some strings to form & the nozzle will hit these. But that print came of the bed to easy, so it’s an Adhesion problem. ---
**Author:** ![gbayne](https://avatars.discourse-cdn.com/v4/letter/g/eb8c5e/32.png) [@gbayne](https://forum.sovol3d.com/u/gbayne)\ **Post date:** [February 21, 2024, 3:22am UTC](https://forum.sovol3d.com/t/extruder-hits-print-on-my-sv06/4514/4 "2024-02-21T03:22:11Z")
turn on z hop, look for youtube videos on it. Have you done a temp tower with that filament? I find that I do best with a nozzle in the 210 to 220 range.